Used Machine Tools in Greater Poland, Poland

BLUM Procer hinge drill

• Manufacturer: Blum

BLUM Procenter Hinge Drilling Machine Manufacturer: Blum Type: Pro-Center Year of Manufacture: 2005 Drilling and inserting hardware vertically and horizontally using various drilling heads, 17-spindle drilling he...

SCM Nova TI 105 milling machine

• Manufacturer: SCM / SCMI

Technical data: The length of the trolley: 120 cm | Shank size: 30 mm | Replaceable pin: Yes | Speed regulation: Yes, 4 speeds | Engine size: 7 KW

Low long spindle milling machine Felder F 700 M

• Manufacturer: Felder

Felder F 700 M vertical spindle milling machine Electric up-down spindle regulation and manual angle adjustment from 0 to +45 degrees spindle chuck Ø30 interchangeable long beds 215cm 4 spindle speeds 5.5KW motor...

Lasm double-sided edge sander

• Manufacturer: Volpato - Lasm

Belt height: 150mm | Oscillation: Mechanical | Electricity demand: 3.6KW | Table adjustment: at an angle | Angle stop: in the countertop

Slotting machine Felder F 700 Z

• Manufacturer: Felder

Slotting machine Felder F 700 Z moving trolley in the table 205 cm, spindle adjustable up-down and at 0-45 degrees spindle Ø 30 interchangeable, motor 7.3 kW, electric brake left-right rotation 4 speed settings V...

Robland circular saw with carriage and milling machine

• Manufacturer: Robland

Robland saw and milling machine, two 2.2 kW, 380V motors, adjustable saw blade up and down and at an angle of 0-45°, milling spindle diameter 30 mm, two spindle speeds: 3000 and 6000 rpm, machine tested and ready...

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Band Saw Wheel width: 940mm 5.5kW motor, 380V power supply Tilting table Band dimensions: min. 6590 - max. 6710mm Machine dimensions: h: 286cm, w: 160cm, l: 100cm (can be transported horizontally) Machine...

Altendorf tkr 45 sliding table saw

• Manufacturer: Altendorf

Altendorf TK R 45 sliding table saw, 140cm carriage, 5.5kW main motor, 400 blade capacity, Hydraulically adjustable blade tilt and up-down, 85cm cutting width on the right side, Machine in good condition.

Panhnas 690 type 320cm sliding table saw

Panhans sliding table saw, 320 cm carriage on bars, hydraulic up-down and angle adjustment of the saw blade, 5.5 kW main motor, separate scoring unit, 3 cutting speeds, maximum blade size 400 mm, machine in good ...

APS KS-160 crosscut saw

APS KS-160 Crosscut Saw Cutting width: 450mm Maximum cutting height: 160mm with a material width of approximately 180mm Blade diameter: 550mm Motor: approximately 5.5kW, 380V Material pressure: Pneumatic blade he...

Robland NZ 3800 format saw

• Manufacturer: Robland

Robland NZ3800 sliding table saw with a carriage, scoring unit with a separate motor, carriage length 380 cm, 0-45° tilt adjustment with electrical readout, saw blade up and down adjustment, motorized right-hand ...

SCM nova si40 sliding table saw

• Manufacturer: SCM / SCMI

SCM Nova Si40 Sliding Table Saw 320cm carriage, 7kW main motor, 0.75kW scoring unit, Right-side motorized culage up to 1226mm, 2 speeds: 3500 and 5000 rpm, Digital readout on the carriage, Used machine, very good...

Cross-cut Saw Felder kappa 400 format 4

• Manufacturer: Felder

Cross-cut Saw Felder kappa 400 format 4 carriage 320cm, tilting and up-down saw blade electrically adjustable culage on the right side manually adjustable up to 1250mm, kerf 1.1KW, main motor 7.3KW, 3 cutting spe...

Kamro sliding table saw

Kamro Sliding Table Saw 150cm carriage, 5.5kW main motor, 2 cutting speeds, 400 blades maximum, manual up-down blade adjustment, 90cm cutting width on the right side, and fully functional.