Used Processing in Saxony, Germany

Luther Werke S200W

• Manufacturer: Luther Werke

REFUELING PUMP; GASOLINE PUMP WITH ENGINE; FUEL PUMP Comes from military stock. The pump is gasoline powered. It refuels fuel into fuel tanks e.g. car; truck. Mix gasoline with two-stroke engine oil in the ratio ...

2021 Hertz HBD7

• Manufacturer: Hertz
• Power requirement: 7.5 kW

SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated pressure tank - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D.

1998 Buran DSM SP 0020 A/301

• Manufacturer: Buran DSM
• Power requirement: 0.16 kW

dryer Buran Buran DSM, YOM 1998; capacity 0,16kW, possible pressure 16bar, Filter-Ultramat Typ AG 0009, with internal safety against overpressure - with oil separator

Tsomakos TSFD70/3-11-federhärten

• Manufacturer: Tsomakos

Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustabl...

1993 VEM ANTRIEBSTECHNIK VDE 0530TI/7.91

• Manufacturer: VEM

Dust Suction Device - impeller Dm = 600x160mm - impeller = 360mm Intake: - intake conical dia = 250x200x200mm - collar dia = 250mm Exhaust opening: - dia = 250mm; Collar dia = 310mm Accessories: - 3x wall clamps ...

1975 Oberursel nicht bekannt

• Manufacturer: Oberursel
• Power requirement: 1.1 kW

With this machine can be packed parts respectively shrink-wrapped. There is a table with 4 stations on the machine. Can be purchased together with vaccum welding machine. i.D.

2003 KÜMA APPARATEBAU GMBH RWT30-1KK

• Manufacturer: KÜMA APPARATEBAU GMBH
• Power requirement: 0.76 kW

heat exchanger application area: transportation of heat energy from a medium to another medium (liquid or gas) connections 3/4" for flow/return 2x both sides 2 Pieces available

2001 FREUDENBERG FAINJECT 2000

• Manufacturer: Freudenberg
• Model: FAINJECT 2000
• Power requirement: 36.5 kW

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume...

1991 ECOAIR D40

• Manufacturer: Ecoair
• Model: D40
• Power requirement: 30 kW

compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar

2003 ULTRATROCK HPD 0060 Typ602

• Manufacturer: ULTRATROCK

nominal power of the dryer: - pressure connections 3/8" - refrigerants R 134a - removal of condensate G - PED 97/23/EC - TSL 2°C - TSH 60°C The mentioned details are relating to a operation pressure of 40 bar, of...

1981 EISELT TROCKNUNGSANLAGEN T 600

• Manufacturer: EISELT TROCKNUNGSANLAGEN
• Power requirement: 2.5 kW

Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, b...

FLYGT M18-11-4AL / Banana SR agitator

• Manufacturer: Flygt

Banana SR Agitator Slow speed submersible mixer Vane Mixer Impeller Low Speed Mixer Propeller Agitator Propeller Mixer Xylems Flygt Banana SR agitator used Low speed, high efficiency Low-speed Flygt agitators are...

Swarf Conveyor

Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20m...

2010 Richter SP 450 / 63

• Manufacturer: Richter
• Power requirement: 0.75 kW

Made of sturdy sheet steel construction. This is a scraper belt conveyor. Drop-in width: F1= 480mm; Drop-in length: 750mm Ejection: height H = 3200mm Infeed (underfeed to the machine): height = 300mm + superstruc...

2004 DGS SYSTEM GMBH KBF 325

• Manufacturer: DGS SYSTEM GMBH
• Power requirement: 0.37 kW

Scraper belt conveyor combined with cooling water system and torque shut-off Discharge length D=280mm Chip infeed width F=325mm Insertion height B=approx. 160mm Insertion height B+I=220mm Chip infeed width F1=300...