Geared Head Drill
- Manufacturer: Sx power
Used Geared Head Drill Vice Drill chuck and Arbor 25mm Drilling Capacity Good working condition 415 volt Since 1990, Shaw Machinery has been a trusted name in Engineering, with our origins dating back to 1968. Ou...
$1,141 USDClontarf, Australia
Geared Head Pedestal Drill
- Manufacturer: HXMC
Geared Head Pedestal Drill comes with Drill chuck and Arbor Round Table 25mm Capacity Since 1990, Shaw Machinery has been a trusted name in Engineering, with our origins dating back to 1968. Our seasoned, expert ...
$1,072 USDClontarf, Australia
Nider Geared Head Drill Press
Used Nider Geared Head Drill Press - $1000 + GST - excellent condition - 415v - keyless chuck - same as an Arboga - 100-1300 rpm - geared head - loading available
$761 USDMayfield West, Australia
Brobo Waldown 8SN Pedestal Drill Press
- Manufacturer: Brobo
Used Brobo Waldown 8SN Pedestal Drill Press - $1500 + GST - 415v, 0.75kW motor - excellent condition, ex govt - t-slot table - Australian made - hand wind table lift and lower - tiltable table - 160 to 5500 rpm -...
$1,141 USDMayfield West, Australia
Pedestal Drill
Strands S-53 geared head pedestal drill 3 morse taper, speeds 100-1360rpm (8 off) 2 speed 415 volt motor 1/1.2hp. Foot safety pedal Made in Sweden. Ex Govt.
$1,027 USDBoolaroo, Australia
Geared Pedestal Drill
Erlo TCA-32 Geared Head Pedestal Drill 4mt, 77-1280rpm, power feeds. 530mm x 450mm tilting table, coolant, light 1.5hp, 415volt. Machine weight 500kg
$2,663 USDBoolaroo, Australia
Geared Head Pedestal Drill
ERLO TSAR-32 4mt, capacity 32mm drilling, 28mm tapping. spindle speeds 75-2100rpm (8 off), feeds 0.1-0.3mm/rev (3 off) 400mm x 420mm tilt table, 160mm quill travel, 70-885mm spindle to table 1.1kw 415volt, Coolan...
$3,234 USDBoolaroo, Australia
Waldown Radial Arm Pedestal Drill
Used Waldown Radial Arm Pedestal Drill - $1200 + GST - 240v! - Australian made! - in excellent condition - table has had some minor braze repairs - keyless chuck - table lifter - table can rotate - loading available
$913 USDMayfield West, Australia- Trusted Seller
Hawthorn, Australia 
ERLO TSAR-32
- Manufacturer: Erlo
RLO TSAR-32 4mt, capacity 32mm drilling, 28mm tapping. spindle speeds 75-2100rpm (8 off), feeds 0.1-0.3mm/rev (3 off) 400mm x 420mm tilt table, 160mm quill travel, 70-885mm spindle to table 1.1kw 415volt, Coo...
$3,234 USDBoolaroo, Australia
Erlo TCA-32
- Manufacturer: Erlo
- Model: TCA-32
Erlo TCA-32 Geared Head Pedestal Drill 4mt, 77-1280rpm, power feeds. 530mm x 450mm tilting table, coolant, light 1.5hp, 415volt. Machine weight 500kg
$2,663 USDBoolaroo, Australia- Trusted Seller
ERLO TSAR-32 PEDESTAL DRILL PRESS
- Manufacturer: Erlo
- Model: TSAR 32
- Throat depth: 300 mm
- Drilling diameter: 32 mm
ERLO TSAR-32 – Specification Sheet Capacity Table / Travel / Dimensions Speeds & Motor Weight Please request a spec check if relying on a particular specification.
$2,940 USDMelbourne, Australia - Trusted Seller
ERLO TSAR-32 PEDESTAL DRILL PRESS
- Manufacturer: Erlo
- Model: TSAR 32
- Throat depth: 300 mm
- Drilling diameter: 32 mm
ERLO TSAR-32 – Specification Sheet Capacity Table / Travel / Dimensions Speeds & Motor Weight Please request a spec check if relying on a particular specification.
$2,940 USDMelbourne, Australia - Trusted Seller
ERLO TSAR-32 PEDESTAL DRILL PRESS
- Manufacturer: Erlo
- Model: TSAR 32
- Throat depth: 300 mm
- Drilling diameter: 32 mm
ERLO TSAR-32 – Specification Sheet Capacity Table / Travel / Dimensions Speeds & Motor Weight Please request a spec check if relying on a particular specification.
$2,940 USDMelbourne, Australia - Trusted Seller
ERLO TSAR-32 PEDESTAL DRILL PRESS
- Manufacturer: Erlo
- Model: TSAR 32
- Throat depth: 300 mm
- Drilling diameter: 32 mm
ERLO TSAR-32 – Specification Sheet Capacity Table / Travel / Dimensions Speeds & Motor Weight Please request a spec check if relying on a particular specification.
$2,940 USDMelbourne, Australia
Tip: Enter manufacturer, model or keyword