Used Processing in Hamburg, Germany

2003 BAVELLONI Egar 315-4 Ts-
- Manufacturer: Bavelloni
- Model: Egar
CNC machining center Interpolated axis 4 KW 9.6 X-axis mm. 2,730 Y-axis mm. 1,620 Software Cad Cam Easycad Steep taper ISO 40 Tool magazine positions 19 Voltage V.400 Hz 50 More used machines at: www.janssen-used...
Hamburg, Germany
2007 Donatoni QUADRIX Top 1100
- Manufacturer: Donatoni
- Model: Quadrix
CNC machining center with 5 interpolated axes CAD/CAM software WCAM Maximum saw blade diameter: 1,100 mm Z-axis travel: 800 mm Motor: 30 hp – 22 kW with ISO 50 taper, including frequency converter 0–180° rotatabl...
Hamburg, Germany
2007 GMM Litox 38-
- Manufacturer: GMM
- Model: Litox 38
CNC bridge saw with 5-axis head Saw blade diameter ø 825 mm Tilt table Main motor power 30 HP Variable speed drive (inverter) Tilt head (5 axes) from 0° to 90° Complete with automatic programs such as single cuts...
Hamburg, Germany
GMM Lexta 36 full-
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw for granite - Refurbished with 6 months warranty. Installation and training can be carried out at an extra cost. Maximum horizontal stroke of the saw 3600 mm Maximum vertical stroke of the saw 420 mm M...
Hamburg, Germany
2010 MBD Lace 229/2-
- Manufacturer: Janssen Steintechnik
Calibration machine for slabs 2 calibration units Diamond tools per head: 24 Diamond tool width: 12 mm Rated power: 101 kW Voltage: 400 V – 50 Hz Usable working width: 300 mm – 2,100 mm Usable working thickness: ...
Hamburg, Germany
2017 INTERMAC Master 45-
- Manufacturer: Intermac
- Model: Master 45
5-Axis CNC Machining Center Operating Hours: 3,568 Maximum Dimensions: 4,060 x 2,300 mm PC-controlled 5-axis machining center for milling, drilling, grinding, polishing, beveling, and engraving marble, stone, and...
Hamburg, Germany
2002 Comandulli EDILUX 8+4 DX-
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...
Hamburg, Germany
2005 Dr. Kronenberger -
- Manufacturer: Dr. Kronenberger
Complete water treatment including all pumps Pre-clarification tank Septic tank 1 new sludge container of approx. 5m³, the fine metal grid in the container works like a coffee filter, the water runs out the botto...
Hamburg, Germany
2015 Intermac Master 850
- Manufacturer: Intermac
CNC machining center/CNC bridge saw 60-tool magazine Saw blade included Bsolid CAD/CAM software Machine equipped with deposition tools, drain, and drums for straight edges Vacuum cleaner included More used machin...
Hamburg, Germany
1998 SIMEC LM2000/212
- Manufacturer: Simec
- Model: LM 2000
Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...
Hamburg, Germany
2002 SIMEC NT2/2M-
- Manufacturer: Simec
Block Cutter Maximum input block size: 2,300 x 3,400 x 2,100 mm Maximum number of vertical saws: 2 Maximum vertical saw blade diameter: 1,700 mm Minimum vertical saw blade diameter: 1,000 mm Maximum horizontal sa...
Hamburg, Germany
2020 Omag Area Cut-
- Manufacturer: Omag
5-axis CNC bridge saw with 5-axis head 100 hours of operation (as new) Siemens CNC control 1 vacuum cleaner for separating the workpieces is located behind the head R 1/2" connection in the motor shaft Max. saw b...
Hamburg, Germany
2003 Bavelloni Egar 250-4
- Manufacturer: Bavelloni
- Model: Egar 250
CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...
Hamburg, Germany
2005 Omag Mill 4X-
- Manufacturer: Omag
- Model: Mill 4X
CNC machining center with 4 axes 25-position tool magazine Collet replaced with original Saccardo parts. Touchscreen and computer are brand new Approximately 20 steep taper chucks are also included with the machi...
Hamburg, Germany
2010 Prussiani Champion 60-
- Manufacturer: Prussiani
- Model: Champion
CNC 5-axis monoblock bridge saw with vacuum lifting system Vacuum lifter for automatic loading Tilt table X-axis 3,500 mm Y-axis 2,200 mm Z-axis 300 mm 5-axis head from 0° to 90° CAD/CAM software Wcam2k More used...
Hamburg, Germany