BATTENFELD CM55 TWIN SCREW EXTRUDER 18510
- Manufacturer: Battenfeld
Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...
Elk Grove Village, IL- Trusted Seller
Battenfeld BK850/200 85 Ton Horizontal Injection Molder
- Manufacturer: Battenfeld
One (1) used Battenfeld Model BK850/200 85 Ton Horizontal Injection Molder. This unit features a maximum platen opening of 12", maximum opening stroke (adjustable) 13.8", complete with Unilog 4000 controller.
St. Petersburg, FL - Trusted Seller
56" Wide HPM/Battenfeld Gloucester Horizontal Sheet Line
- Manufacturer: Battenfeld
- Model: Gloucester
56" Wide Battenfeld Gloucester Horizontal Sheet Line Line Consists Of The Following Pieces: 3.5" HPM Extruder, 30:1 L/D, 11.67:1 Gearbox Ratio, Lufkin Gearbox, 125 HP DC Motor, 7 Barrel Zones, Water Cooled Barre...
United States Battenfeld Fischer FHB-106-1
- Manufacturer: Battenfeld
Shuttle Style Blow Molder Used Battenfeld Fischer FHB-106-1 Blow Molder for Sale. This pre-owned Battenfeld Fischer blow molding machine is located in The United States and available to be seen under power for a...
USA2013 Battenfeld HM110/525
- Manufacturer: Battenfeld
120 Ton 6.19 oz Shot Size Injection Molding Machine Used Battenfeld HM110/525 (2013) Injection Molding Machine for Sale. This pre-owned Battenfeld plastic injection molding machine is located in The United State...
USA2012 Battenfeld HM65 Servopower
- Manufacturer: Battenfeld
72 Ton 2.84 oz Shot Size Injection Molding Machine Used Battenfeld HM65 Servopower (2012) Injection Molding Machine for Sale. This pre-owned Battenfeld plastic injection molding machine is located in The United ...
USA2021 Battenfeld MicroPower 15/10 Unilog B8
- Manufacturer: Battenfeld
15 Ton 0.36 oz Shot Size Injection Molding Machine Used Battenfeld MicroPower 15/10 Unilog B8 (2021) Injection Molding Machine for Sale. This pre-owned Battenfeld plastic injection molding machine is located in ...
USA- Trusted Seller
1992 Spraying machine 25 to from Battenfeld - DA 250/50 CD 3164
- Manufacturer: Battenfeld
- Model: DA 25050 CD
Spraying machine -control Unilog 2040 -data acquisition terminal -parts removal device make ASS -temperature control unit make Single
Wiefelstede, Germany - Trusted Seller
1990 BATTENFELD FISCHER VK1-1.02
- Manufacturer: Battenfeld
PE Blow Molding Extrusion MachineCurrent Container Size: 0.20 LNumber of Dies: 2Material Type: PEMaximum Container Size: 1 LNumber of Stations: 1Capacity (units/hour or kg/hour): 1000/h (small bottles)Extruder Ty...
Spain - Trusted Seller
2003 Battenfeld 7 layer Coex Blow Film Line
- Manufacturer: Battenfeld
Number of layers: 7 Material: Barrier film, LDPE, EVOH, thickness 30 to 300microns Film width: 2200mm Output: 500kg/h Extruder 1: A Screw diameter: 75mm Motor: 65kw Gravimetric dosing unit Doteco 4 comp E...
Europe - Trusted Seller
Battenfeld – Used Co-extrusion line
- Manufacturer: Battenfeld
BATTENFELD 7 Layers Co-Extrusion line Extruders:7 Extruders with the following screw diameter: A: 75mmØ; B/C/D/E/F: 50mm Ø; G: 75mm Ø Head: 7-Layer blown film die head Rewind:Double winder, fully automatic back t...
Vissenbjerg, Denmark 
2018 Battenfeld VM R 200V (R1755)
- Manufacturer: Battenfeld
* Control unit: UNILOG B8 * Without granule separator * Operating hours: 13,467 h / 491 shots * Good condition, currently in storage. * Viewings possible at short notice by prior arrangement. Locking unit: VM 20...
Ansbach, Germany
(2014) Wittmann Battenfeld MacroPower E 450/2100+ UNILOG B6P, SERVO
- Manufacturer: Battenfeld
Model: MacroPower E 450/2100+ UNILOG B6P (SERVO) Control: UNILOG B6 Technical Data Injection Unit Screw diameter = 65 mm Screw L/D ratio = 22 Specific injection pressure = 1959 bar Calculated stroke volume ...
Trenčín, SlovakiaPEX-C complete pipeline BATTENFELD DN. 12-16-20-25
- Manufacturer: Battenfeld
Used complete PEX-C pipeline BATTENFELD:Year of production:2011 • Extruder Battenfeld 60-30 with drive kW130• 2 Coextruder Herbert Stork 30LD25 with drives 7,5 kW • 1 Coextruder Herbert Stork 35LD25 with drive15 ...
Novara, Italy- Trusted Seller
2003 Battenfeld HM 1600/750
- Manufacturer: Battenfeld
- Model: HM 1600750
This Battenfeld HM 1600/750 was manufactured in 2003. It features a clamping force of 1,600 kN and an injection pressure of 2,116 bar. The screw diameter is 50 mm, and it includes a unilog CC300 B4 control system...
Czechia - Trusted Seller
2003 Battenfeld HM 1600/750
- Manufacturer: Battenfeld
- Model: HM 1600750
This Battenfeld HM 1600/750 was manufactured in 2003. It features a clamping force of 1,600 kN and an injection pressure of 2,116 bar. The screw diameter is 50 mm, and it includes a unilog CC300 B4 control system...
Czechia
Tip: Enter manufacturer, model or keyword
