- Trusted Seller
Airpress 11 bar
used
- Manufacturer: Airpress
Suction Capacity: 600 liter/min Effective capacity 360 liter/min Tank capacity: 300 liter Motor capacity 4.0 HP / 3.0 kW Pump type: K25 Voltage: 400 V / 50 Hz / 3 Ph Pump speed: 1170 rpm Working pressure: 11 bar ...
Deinze, Belgium - Trusted Seller
Eisenmann Auto Powdercoat unit
used
- Manufacturer: Eisenmann
Automatisch gestuurde poedercoatstation: - verplaatsbaar op rails - met eigen recuperatie- filterinstallatie - met 2 robots - elke robot heeft 3 pistolen Ingangsafmetingen van de tunnel: 1000 breed x 1800 hoog P...
Deinze, Belgium - Trusted Seller
Amax Coldpress 110 ton
used
- Manufacturer: Amax Coldpress
Formerly used to manufacture flowerpots using composite materials. carousel press equipped with: - inlet funnel - control cabinet - 3 aggregates - exhaust air fans + tunnel step 1: filling step 2: pressing ...
Deinze, Belgium - Trusted Seller
Deinze, Belgium - Trusted Seller
Samafor Ø 81 mm
used
- Manufacturer: Samafor
Extrusion of plastic tubes or profiles Max Ø 81 mm screw Ø 60 mm 33 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 50...
Deinze, Belgium - Trusted Seller
Yvroud 94/07 116 Ø40 mm
used
- Manufacturer: Yvroud
Extrusion of plastic tubes max Ø 40 mm Screw Ø 45 Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81 click here Samafor...
Deinze, Belgium - Trusted Seller
Reifenhauser Ø 30 mm
used
- Manufacturer: Reifenhäuser
extrusion of plastic tubes or profiles Ø 30 mm max screw Ø 60 Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81 click ...
Deinze, Belgium - Trusted Seller
Netstal N235-90MP injection moulding
used
- Manufacturer: Netstal
clamping force 900 kN injection force 196 kN opening space 125 - 300 mm mould space 200 - 500 mm including: hopper / mixer conveyor without tooling
Deinze, Belgium - Trusted Seller
Breuning Irco Barfeeder Ø 70 x 3000 mm
used
- Manufacturer: Breuning - Irco
Type: SiMag (single channel loading magazine) Cap: Ø 70 mm x 3000 mm Weight: 800 kg
Deinze, Belgium - Trusted Seller
2004 KAESER CSDX 162
used
- Manufacturer: Kaeser
- Model: CSDX 162
Screw compressor KAESER type CSDX 162 year of construction 2004, Technical details : • Feed pressure: 7 bar @ 15°C • Max. pressure : 15 bar • Total nominal power requirement: 90 kW • Volume capacity (Vmin-Vmax): ...
Deinze, Belgium - Trusted Seller
2006 MATTHIJS MS-00029595
used
- Manufacturer: MATTHIJS
Automatic carpet packing machine MATTHYS type MS-00029595 serial number 200-31318-0-01 year of construction 2006, max. working width 3100mm, made to roll and pack carpets in sealed plastic foil. Equipment : 2 x c...
Deinze, Belgium - Trusted Seller
2010 MATHERM Ceratherm SP
used
- Manufacturer: MATHERM
Infra-red drying unit MATHERM type Ceratherm SP serial number 10-736 year of construction 2010, max. working width 2400mm, 2 guiding rolls each 2950mm, electrical power unit 345kW, 400V, electrical drawings, suct...
Deinze, Belgium - Trusted Seller
1985 KUESTERS 413.5
used
- Manufacturer: Kuesters
Thermo-bonding Calander Küsters type 413.50 year of construction 1985, Nominal width: 3700 mm, Fabric width: 3500 mm / conversion to 3200 mm, total force: 555 kN, Line force: 150 N/mm, Production speed: 10-150 m/...
Deinze, Belgium - Trusted Seller
2020 ATLAS COPCO E-AIRV1100
used
- Manufacturer: Atlas-Copco
Weight [kg]: 2750 | Length [m]: 3.47 | Width [m]: 1.22 | Height [m]: 1.8 | Location machine: Belgium - EU
Waregem, Belgium - Trusted Seller
ATLAS COPCO XAIR75025
used
- Manufacturer: Atlas-Copco
Capacity [m³/min]: 20 | Pressure [bar]: 25 | Engine: Cummins QSB6.7 | Remarks: Stage V | Weight [kg]: 3757 | Power [kw]: 231 | Outside condition: NEW | Ce mark: ok | Length [m]: 5.66 | Width [m]: 1.92 | Height [...
Waregem, Belgium
Tip: Enter manufacturer, model or keyword