Used Machine Tools in Saxony, Germany

WMW AP255x140x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW AP205x195x65

• Manufacturer: WMW

14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm

Clamping Units Rottler

• Manufacturer: Rottler

4 pieces clamping claws Dimension per clamping claw: L: 420 x W:400 x H: 400mm Clamping surface 80 x 80mm, clamping on both sides Clamping travel approx. 120mm Clamping width flexible Mounting: -Base area LxW: 42...

Clamping Units SEDIN STANKO

• Manufacturer: Sedin

These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping str...

WMW 800x455x250

• Manufacturer: WMW

ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 1...

WMW 810 x 690 x 190

• Manufacturer: WMW

T-slots centric Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Floor-plate length: 810 mm | Plate width: 690 mm | Plate height: 190 mm | Hole diameter: ca. 119...

bolster plate AP 3500x2000x360 (5768)

There are 2 plates for sale. (price per plate) Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2

ROTO RECORD 4 jaw chuck

• Manufacturer: ROTO RECORD

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4-II ( DH315x4-II ) used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 - III ( DH200x3-III ) TGL 30-2333 3x threaded hole: M10 x 1.5, depth: 30 mm used, tested!

PAGUS 3-jaw chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck, power chuck, wedge-hook chuck with adapter PAGUS without baking ! Used!

1986 NARADI PRAHA JU 30

• Manufacturer: NARADI PRAHA

air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa...

MMZ1199

• Manufacturer: Pagus

Machine vice WMW 160 x 180 used, tested !

WMW drill

• Manufacturer: WMW

Twist Drill WMW Ø 69 mm x 425 mm HSS Used! Total length: 425 mm | Spiral length: 230 mm | Morse taper: MK5 | Dimensions: 430 x 70 x 70 mm

MMZ1205

• Manufacturer: Pagus

Machine vice WMW , ROTO RECORD 125 x 160 used, tested !

PAGUS compact tensioner

• Manufacturer: Pagus

NC compact vice, machine vice PAGUS with prism jaw