Used Processing in Saxony, Germany

2021 Hertz HBD7

• Manufacturer: Hertz
• Power requirement: 7.5 kW

SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated pressure tank - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D.

1998 Buran DSM SP 0020 A/301

• Manufacturer: Buran DSM
• Power requirement: 0.16 kW

dryer Buran Buran DSM, YOM 1998; capacity 0,16kW, possible pressure 16bar, Filter-Ultramat Typ AG 0009, with internal safety against overpressure - with oil separator

Tsomakos TSFD70/3-11-federhärten

• Manufacturer: Tsomakos

Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustabl...

1993 VEM ANTRIEBSTECHNIK VDE 0530TI/7.91

• Manufacturer: VEM

Dust Suction Device - impeller Dm = 600x160mm - impeller = 360mm Intake: - intake conical dia = 250x200x200mm - collar dia = 250mm Exhaust opening: - dia = 250mm; Collar dia = 310mm Accessories: - 3x wall clamps ...

1975 Oberursel nicht bekannt

• Manufacturer: Oberursel
• Power requirement: 1.1 kW

With this machine can be packed parts respectively shrink-wrapped. There is a table with 4 stations on the machine. Can be purchased together with vaccum welding machine. i.D.

2003 KÜMA APPARATEBAU GMBH RWT30-1KK

• Manufacturer: KÜMA APPARATEBAU GMBH
• Power requirement: 0.76 kW

heat exchanger application area: transportation of heat energy from a medium to another medium (liquid or gas) connections 3/4" for flow/return 2x both sides 2 Pieces available

2001 FREUDENBERG FAINJECT 2000

• Manufacturer: Freudenberg
• Model: FAINJECT 2000
• Power requirement: 36.5 kW

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume...

1991 ECOAIR D40

• Manufacturer: Ecoair
• Model: D40
• Power requirement: 30 kW

compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar

2003 ULTRATROCK HPD 0060 Typ602

• Manufacturer: ULTRATROCK

nominal power of the dryer: - pressure connections 3/8" - refrigerants R 134a - removal of condensate G - PED 97/23/EC - TSL 2°C - TSH 60°C The mentioned details are relating to a operation pressure of 40 bar, of...

1981 EISELT TROCKNUNGSANLAGEN T 600

• Manufacturer: EISELT TROCKNUNGSANLAGEN
• Power requirement: 2.5 kW

Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, b...

WOODS axial fan

• Manufacturer: Woods

Axial fan, axial blower, axial fan WOODS 90JM/25/4/9/20 3S D132/24 Motor: DA132MK-P 9.0kW 1445 rpm 127 - 220V 3AC 50Hz IP55 New !

TOOL-TEMP temperature control unit for oil and water

• Manufacturer: Tool Temp

Oil and water temperature control unit TOOL-TEMP Type TT-168 E c-Spec. Heating capacity: Water: 12.18 kW / Oil: 6.0 kW Approx. 2.0 m connection cable Used, tested!

VEM axial fan

• Manufacturer: VEM

Axial fan, axial fan, axial fan VEM, MACHINE FACTORY NEMA LANW 315.4T TGL27476 Motor: DM b 102/4-A6T /609 (DMb102 /4-A6T /609) 0.06kW 1400rpm 220/380V 3AC 50Hz IP44 approx. 2.4m connection cable used, checked!

NOVOTEC filter cartridge

Filter cartridge NOVOTEC 04.01.050 New! Oem number: 246.249, 951101009 | Filter fineness: 5 µm | Material: paper | Inner diameter: Ø 31 mm | Outer diameter: Ã 150 mm | Construction length: 365 mm | Dimensions (pa...

Mobile chip vacuum cleaner Styrosog 1000

Mobile chip vacuum cleaner, vacuum cleaner for packaging chips Styrosog 1000 Hose length approx. 2 meters E7D2B-009 0.55 kW, 2810 rpm 220V AC 4.2A with built-in chip separator mobile used, tested!