Building Filters
BEFAMA Filters
new
- Manufacturer: Befama
The offered filtering stations are equipped with stationary bag filters in the amount of two to five bags in one station. Filters usually have a diameter of 500 mm and are divided into two parts: the upper one an...
Katowice, Poland
BEFAMA MW6
new
- Manufacturer: Befama
The MW6 multi-chamber mixer is used for the precise preparation of the mixture of fibers made of several fiber components with a length not exceeding 80 mm. When creating a mixture of several raw materials, it is...
Katowice, Poland
BEFAMA Cyclones
new
- Manufacturer: Befama
The dust extracting cyclone, applied in pneumatic conveyance system, is designed for supplying fiber to contnuous-operation blending chamber, to fiber-storage boxes, bins, or feeders of various designs. It can al...
Katowice, Poland
BEFAMA 5W50
new
- Manufacturer: Befama
The 5W50-series lappers can work with non-woven carding machines of 1000, 1800, 2000, 2200 or 2500 mm working width. Lapping width according to the lapper type: from 600 to 4200 mm. The crosslapper is equipped wi...
Katowice, Poland
BEFAMA 5WN700
new
- Manufacturer: Befama
The 5WN700 series lappers can work with nonwovens carding sets of 2200 and 2500 mm with working widths. Lapping widths depending on the type: from 2800 to 6300 mm. The surface mass of the pile deck: from 60 to 60...
Katowice, Poland
BEFAMA CR
new
- Manufacturer: Befama
Carding sets for the production of yarn from wool fibers, its blends and regenerated fibers. Installed power depends on the working width and machine configuration.
Katowice, Poland
BEFAMA CU121
new
- Manufacturer: Befama
The CU121 carding set is used for processing test blends of different fibers and colors to select optimum carding parameters for different mixture ratios.The carding set, along with a crosslapper, needlepunching ...
Katowice, Poland
BEFAMA 3AGK
new
- Manufacturer: Befama
The 3AGK is a carding machine specifically developed for clothing industry. It is suitable for making web used as base material for hat felt. A large main cylinder along with seven pairs of working/stripping roll...
Katowice, Poland
BEFAMA AB19
new
- Manufacturer: Befama
The AB19 picker opens the fibers before carding. In an opening-blending line it is normally used with an OB1 feeder and a WB fan on the exit side. AB19G- special version for glass fibers, roller feed, main drum w...
Katowice, Poland
BEFAMA KMC
new
- Manufacturer: Befama
The KMC continuous work chambers is intended for the accumulation and mixing of fibers delivered by pneumatic transport.
Katowice, Poland
BEFAMA CU661, CU669
new
- Manufacturer: Befama
- Model: CU661
Double doffer carding machines are designed for the production of nonwovens of high grammage, usually in the range of 100 - 2000 g / m2. Installed power depends on the working width and machine configuration.
Katowice, Poland
BEFAMA Rotary condensers
new
- Manufacturer: Befama
Dedusting condenser designed for raw material dosing in pneumatic transport installations. The operation of the device is based on the separation of air and dust from the raw material at the end of the installati...
Katowice, Poland
BEFAMA WD3 - WD6
new
- Manufacturer: Befama
The webdrafter, installed after the crosslapper and most often in front of the needling machine or the oven, improves the strength parameters of the nonwoven fabric. By using a minimum of three and a maximum of s...
Katowice, Poland
BEFAMA TP, TPR
new
- Manufacturer: Befama
- Model: TP
The TP conveyor collects material from one or more weighing feeders (usually 2 to 5 feeders) and transports it to further machines within the processing line. The TPR conveyor has an additional opening roller ins...
Katowice, Poland
BEFAMA AB6N, AB6A
new
- Manufacturer: Befama
- Model: AB6
The carding willow AB6 is mainly used to prepare fiber material for carding. It can work within an opening-blending line or serve as a separate pre-opening machine. Types: AB6N - stationary willow, AB6A - rotatab...
Katowice, Poland