Machine Tools » Bending & Forming

Search By Manufacturer

Search By Country

Building Filters

88

Used headers

  • 3/16″ National Tubular Rivet Header

    3/16″ National Tubular Rivet Header

      MAXIMUM SHANK LENGTH 1″ (25mm) MAXIMUM DIAMETER 3/16″ HOLE DEPTH 3/8″ (10mm) SPEED 225 PPM cracked oil can (on side of machine) (nothing major)

      Posen, IL
    • 5/16″ National DSSD Cold Header

      5/16″ National DSSD Cold Header

        5/16″ Maximum Cutoff Diameter 4-1/2″ Maximum Cutoff Length 3-1/4″ Maximum Kickout Length 125 PPM AC Motor & Controls

        Posen, IL
      • 3/16″ National Tubular Rivet Header

        3/16″ National Tubular Rivet Header

          MAXIMUM SHANK LENGTH 1″ (25mm) MAXIMUM DIAMETER 3/16″ HOLE DEPTH 3/8″ (10mm) SPEED 225 PPM 240v Newer Paint, Completely Tooled up, full running condition Can be purchased as a full line, with matching wire drawer...

          Posen, IL
        • Trusted Seller
          3/16 Waterbury Hi-Pro Header

          3/16 Waterbury Hi-Pro Header

          • Manufacturer: Waterbury Farrel

          Can be seen under power.

          Byron, IL
        • Trusted Seller
          1981 No. 5 NATIONAL DSSD

          1981 No. 5 NATIONAL DSSD COLD HEADER

            SPECIFICATIONS: FEATURES: * BUSHING CUTOFF * SPLIT PUNCH BLOCKS * SET-UP FOR PKO IN BOTH PUNCHES * IDC SOUND ENCLOSER * HELM TM6 MONITOR * BLANK WIPER

            Byron, IL
          • Trusted Seller
            ¾” 1012 NATIONAL DSSD Long

            ¾” 1012 NATIONAL DSSD Long Stroke COLD HEADER

              SPECIFICATIONS: MAX. DIE KNOCKOUT:.: 6.000 FEATURES: POSITIVE KNOCKOUT BUSHING CUT-OFF FASTENER ENGINEERS model DTHA-4095-44 with FEED HEAD

              Byron, IL
            • Trusted Seller
              National 25 Cold Header 1/8″

              National 25 Cold Header 1/8″ LS

                SPECIFICATIONS: FEATURES: * BUSHING CUT-OFF * SPLIT PUNCH BLOCKS *Extra Tooling Available

                Byron, IL
              • 3/8" National 1D2B Cold Header

                3/8" National 1D2B Cold Header

                  220V Maximum cutoff diameter: 3/8″ | Maximum shank length: 1-3/4″ | Maximum cutoff length: 3″ | Maximum production rate: 100 PPM | Weight: 14300 lbs | Dimensions: 124 × 62 in

                  Posen, IL
                • 2.5mm Nakashimada MH-05 DSSD Header

                  2.5mm Nakashimada MH-05 DSSD Header – 1 of 2

                  • Manufacturer: Nakashimada

                  2.5mm Max. Cutoff Diameter 18mm Max. Cutoff Length 12mm Max. Shank Length 10mm Max. PKO Stroke 1st Punch 5mm Max. PKO Stroke 2nd Punch 200/250 PPM

                  Posen, IL
                • 2.5mm Nakashimada MH-05 DSSD Header

                  2.5mm Nakashimada MH-05 DSSD Header – 2 of 2

                  • Manufacturer: Nakashimada

                  2.5mm Max. Cutoff Diameter 18mm Max. Cutoff Length 12mm Max. Shank Length 10mm Max. PKO Stroke 1st Punch 5mm Max. PKO Stroke 2nd Punch 200/250 PPM

                  Posen, IL
                • 3/4″ Hilgeland CH-6 1D2B Cold

                  3/4″ Hilgeland CH-6 1D2B Cold Header

                  • Manufacturer: Hilgeland

                  3/4″ Cutoff Diameter 7″ Cutoff Length 56 PPM Weight: 57321 lbs

                  Posen, IL
                • 7.5mm Nakashimada H20GSPL 1D2B Header

                  7.5mm Nakashimada H20GSPL 1D2B Header

                  • Manufacturer: Nakashimada

                  Max Cutoff Diameter 7.5mm Max Cutoff Length 180mm Shank Length 75 – 155 Cutoff Die 20 x 35 (dia x length) Die 50 x 190 1st Punch 28 x 57 2nd Punch 40 x 64 1st Punch KO Stroke 22 2nd Punch KO Stroke 18 Production ...

                  Posen, IL
                • Trusted Seller
                  Sacma SP-11 1D/2B 1/4″ Cold

                  Sacma SP-11 1D/2B 1/4″ Cold Header

                  • Manufacturer: Sacma

                  SPECIFICATIONS: Max. wire diameter: .250 | Max. shank length: . 2.000 | Max. cut-off length: 2.750 | Production rate: 275 ppm

                  Byron, IL
                • Trusted Seller
                  Sacma SP-11 1D/2B 1/4″ Cold

                  Sacma SP-11 1D/2B 1/4″ Cold Header

                  • Manufacturer: Sacma

                  SPECIFICATIONS: Max. wire diameter: .250 | Max. shank length: . 2.000 | Max. cut-off length: 2.750 | Production rate: 275 ppm

                  Byron, IL
                • 5/16″ National 1D2B High-Speed Header

                  5/16″ National 1D2B High-Speed Header w/PKO – 2 of 2

                    Cutoff Diameter 5/16″ Shank Length 1 1/2″ Cutoff Length 2 3/4″ Pieces Per Minute 250 Electrics 20 HP 220/440 Volts AC Motor Bushing Cutoff PKO Process Monitor

                    Posen, IL
                  12345

                  Overview

                  Bending and forming equipment is essential for shaping metal and other materials into desired forms. These machines are commonly used in industries like construction, automotive, and manufacturing to create precise bends, curves, and angles. Typical equipment includes press brakes, tube benders, and roll forming machines, which offer high accuracy and efficiency for various applications.

                  FAQ

                  What factors should I consider when buying bending and forming equipment?

                  Consider the material type and thickness you will be working with, the required bend angles and precision, machine capacity, and any additional features like CNC control or automation.

                  How can I ensure safe shipping for my bending and forming machine?

                  Use a specialized transport service for heavy machinery. Ensure the equipment is well-secured, properly crated, and protected from environmental factors during transit.

                  What maintenance is required for bending and forming machines?

                  Regular maintenance includes lubrication of moving parts, inspection and replacement of worn-out components, calibration checks, and keeping the machine clean and free from debris. Refer to the manufacturer's manual for specific guidelines.