Rohde & Schwarz ESIB26
used
- Manufacturer: Rohde & Schwarz
- Model: ESIB26
Details The Rohde & Schwarz ESIB26 offers high sensitivity and low inherent noise, enabling precise signal detection across a wide dynamic range. Featuring fast measurement speeds, integrated preselection and pre...
Dublin, IrelandEmco 3810/2 SH
used
- Manufacturer: Emco
Details The EMCO 3810/2 SH Single Phase LISN (Shuko Connector) operates over a frequency range of 9 kHz to 30 MHz, supporting a continuous current rating of 10 A. It features two lines (L+N) plus a ground-switche...
Dublin, Irelandemtest NX5
used
- Manufacturer: emtest
Details emtest NX5 (call to reserve your availability) The emtest compact NX5 is a multifunctional test generator that meets international and product-specific transient and power fail requirements, including EF...
Dublin, IrelandHaefely ECOMPACT 4
used
- Manufacturer: Haefely
Details HAEFLEY ECOMPACT 4 The Haefely ECOMPACT 4 is an ultra-compact immunity tester that performs all the most commonly used transient immunity tests, including Surge, EFT, Dips/Interrupts and AC/Surge Magnetic...
Dublin, IrelandTeseq (Schaffner) NSG 5600
used
- Manufacturer: Teseq - Schaffner
Details Modular test system for synchronized supply voltage variations Standardized test procedures and Clone? function User friendly control software AutoStar? with extensive reporting features
Dublin, IrelandHaefely ECOUPLER 4
used
- Manufacturer: Haefely
Details Haefely ECOUPLER 4 The Haefely ECOUPLER 4 is an ultra-compact coupling and decoupling network for burst and surge coupling onto three-phase power lines. ECOUPLER 4 can be controlled manually from its fron...
Dublin, IrelandEMC Partner AVI3000
used
- Manufacturer: EMC
Details EMC Partner AVI3000 (call to schedule availability)The EMC PARTNER AVI3000 Indirect Lighting Generator is a state of the art test system for DO-160 section 22 and MIL-STD-461 CS117. Full compliance up to ...
Dublin, IrelandKeysight (Agilent) N9048B
used
- Manufacturer: Agilent - Keysight
Details Keysight (Agilent) N9048B 1Hz to 44GHz PXE EMI Test Receiver Description: Frequency Range: 1 Hz to 44 GHz Maximum Analysis Bandwidth: 40 MHz Maximum Real-Time BW: 350 MHz DANL @1 GHz: -174 dBm Fully CISPR...
Dublin, IrelandKeysight (Agilent) N9038B
used
- Manufacturer: Agilent - Keysight
Details Keysight (Agilent) N9038B 3Hz To 44GHz Mxe EMI Test Receiver Description: Frequency Range: 3 Hz to 44 GHz Maximum Analysis Bandwidth: 160 MHz Maximum Real-Time BW: 160 MHz DANL @1 GHz: -174 dBm Perform EM...
Dublin, IrelandNoiseKen FNS-AX3-B50
used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AX3-B50 is an advanced Fast Transient Burst Simulator designed for complance testing in accordance with IEC61000-4-4 edition 2. This unit features Pulse Outputs up to 4.8 kV at 2 MHz Puls...
Dublin, IrelandTeseq (Schaffner) NSG5500
used
- Manufacturer: Teseq - Schaffner
Details TESEQ NSG5500 / NSG 5500 The Teseq NSG5500 is a compact and modular Automotive Transient Immunity Test Set solution offers the generators necessary for tests with capacitive discharge pulsed interference ...
Dublin, IrelandKeysight Technologies 8546A
used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 8546A EMI Receiver, composed of the 85462A RF Section and 85460A RF Filter Section, is a CISPR 16-1 compliant system for precise EMI testing from 9 kHz to 6.5 GHz. It enables confor...
Dublin, IrelandTeseq (Schaffner) NSG437
used
- Manufacturer: Teseq - Schaffner
Details TESEQ (SCHAFFNER) NSG437 The Teseq (Schaffner) NSG437 ESD Simulator is designed to sit comfortably in the operator's hand, with cur operating conditions constantly displayed and clearly visible. The simul...
Dublin, IrelandHaefely PIM120
used
- Manufacturer: Haefely
Details Haefely PIM120 (call for availability) The Haefely PIM120 Impulse Module is used with the PCD120 to test telecom systems using the 10/700us impulse (also called telecom impulse). This impulse is character...
Dublin, IrelandHaefely PCD120
used
- Manufacturer: Haefely
Details Haefely PCD120 The Haefely PCD120 CDN, as part of the PSURGE 8000 system is tailored to meet the ITU and IEC requirements for 2 & 4 wire interfaces. It allows the selection of both the required resistors ...
Dublin, Ireland