- Trusted Seller
1971 Bertsch #9
- Manufacturer: Bertsch
8' x 1/2" BERTSCH 3-ROLL PLATE BENDING ROLL with Air Drop End, Model #9, Initial Pinch, New 1971. Air Drop End, Power Bottom-Roll Adjustment, Dial Indicator for Bending Roll Position, Forward & Reverse Switch, Au...
Cincinnati, OH - Trusted Seller
1994 Bertsch 5008
- Manufacturer: Bertsch
– Roll Diameters: Minimum Machine type: Plate Rolls | Capacity: 12” x ‘ | Machine location: Ohio | Stock #: 853008 | – rolling capacity (mild steel): Approximately 1/2″ thickness over an 8′ length. | – pre-bendin...
- Trusted Seller
1982 BERTSCH #14 #0680524
- Manufacturer: Bertsch
- Model: 14
Capacity (boiler duty): 1-3/16" | Capacity (pipe duty): 59/34" | Length of rolls: 10' | Number of rolls: 3 | Diameter of pinch rolls: 17" | Diameter of forming rolls: 17" | Bottom roll adjustment: HYDRAULIC | Re...
Toledo, OH - Trusted Seller
10' x 1/4" BERTSCH PLATE ROLL 16080
- Manufacturer: Bertsch
MODEL #: #8 SERIAL #: 7012 10' MAXIMUM WIDTH INITIAL PINCH TYPE ROLL 8-1/2" DIAMETER ROLLS AIR DROP END PENDANT FOR JOG FUNCTION CAPACITY: 10' x 1/4" BOILER DUTY 41" x 3/8" 21" x 1/2" 7.5 HP 220/440/60/3 DRIVE ...
- Trusted Seller
Bertsch #18 18-1/2" x 17'-2" Bending Pinch Roll
- Manufacturer: Bertsch
- Model: 18
#18 Bertsch Pinch Roll 17'-4" 17'4" on tread, 17'6" between frames with (3) 18-1/2" diameter forged steel rolls Capacity Chart: Mild Steel 3/4" x 17'-2" to 96" ID in one pass 7/8" x 112" 1" x 76" 1-1/8" x 5...
Ohio, USA - Trusted Seller
12' x 3/8" BERTSCH "8" 4-ROLL HYDRAULIC PLATE BENDING ROLL
- Manufacturer: Bertsch
12' x 3/8" BERTSCH "8" 4-ROLL HYDRAULIC PLATE BENDING ROLL - Hydraulic Drop End -10” top roll diameter - 11" bottom roll diameter - 10” side rolls diameter - pre-bending capabilities Imperial Metric 12’ x 3/8” ...
- Trusted Seller
Bertsch #9970 - Bertsch Power Roll #9970
- Manufacturer: Bertsch
Bertsch 4′ x 3/16″ Initial Pinch Power Bending Roll Inventory # 9970 Manual Roll Adjustment
- Trusted Seller
1970 Bertsch 11-B8
- Manufacturer: Bertsch
- Model: 11-B8
3 Roll 137″L X 64″W X 105″H 19,000 LBS Machine type: Plate Rolls | Capacity: 8′ X 5/8″ | Machine location: Ohio | Stock #: 664199 | Roll diameter: 8″ | Top roll diameter: 13″ | Bottom roll diameter: 13.5″
- Trusted Seller
1999 Bertsch AR-45
- Manufacturer: Bertsch
- Model: AR-45
Angle Leg In 5″ x 5″ x 3/4″, 60″ min. ID Top roll 16″ diameter 25 hp Dimensions: 70″ x 70″ x 74″ 12,000 lbs.
- Trusted Seller
8' X 1/2" BERTSCH "9" INITIAL-TYPE PLATE BENDING ROLL w/AIR DROP END - 15 HP MOTOR
- Manufacturer: Bertsch
8' x 1/2" BERTSCH INITIAL-TYPE PLATE BENDING ROLL Imperial Metric Serial No 9980, Model 9 EQUIPPED WITH: Air Drop End Dial Indicator for Bending Roll Position Forward & Reverse Switch Automatic Lubrication System...
- Trusted Seller
5' X 1-1/2" BERTSCH “14” INITIAL-TYPE PLATE BENDING ROLL w/AIR DROP END - 50 HP DRIVE MOTOR
- Manufacturer: Bertsch
- Model: 14
5' X 1-1/2" BERTSCH INITIAL-TYPE PLATE BENDING ROLL SERIAL NO M-7571, MODEL 14 Imperial Metric EQUIPPED WITH: AIR DROP END OPERATORS CONTROL CONSOLE POWER REAR ROLL ADJUSTMENT POWER FRONT ROLL ADJUSTMENT CATALOG ...
- Trusted Seller
12' x 19/32" BERTSCH "11" HEAVY-DUTY INITIAL-TYPE PLATE BENDING ROLL W/AIR DROP END - POWER ROLL ADJUSTMENT - 20 HP MOTOR
- Manufacturer: Bertsch
- Model: 11
12' x 19/32" BERTSCH HEAVY-DUTY INITIAL-TYPE Imperial Metric PLATE BENDING ROLL Serial No M-10320, Model 11 EQUIPPED WITH: Air Drop End 10 HP Rear Roll Adjusting Motor Power Adjustment To Lower Front Pinch Roll (...
BERTSCH #7
- Manufacturer: Bertsch
7' x 1/4" BERTSCH #7 Initial Pinch Mechanical Plate Roll, ideal for precise plate bending. Used condition with pinch feature. Length of rolls: 7', handling a max thickness of 0.25". Perfect for accurate forming n...
Naperville, IL- Trusted Seller
BERTSCH HYDRAULIC PLATE ROLL
- Manufacturer: Bertsch
12' X 1/2" BERTSCH HYDRAULIC PLATE ROLL PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $25,500.00 AS IS HMC Stock # 22217 Machine Serial No.: M-10800 Machine Model No.: 50-12 New Date: 1993 After purchase...
BERTSCH 50-08
- Manufacturer: Bertsch
BERTSCH 50-08 used plate bending rolls, featuring 96.0" roll length, 12.0" roll diameter, and capable of handling up to 0.5" max thickness. Ideal for professional metal bending applications.
Naperville, IL
Bertsch AR-45 Bending & Forming
- Manufacturer: Bertsch
- Model: AR-45
Good condition Bertsch AR-45 Bending & Formings manufactured in 1999. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword