Used Machine Tools in Denmark

2009 MAZAK VTC 800/30SR

• Manufacturer: Mazak
• Model: VTC 800/30SR
• Spindle taper: ISO 40
• Power requirement: 15 kW

Disclaimer Total power: 20 KVA | Table size: 3500 x 820 mm | Spindle taper: ISO 40 | Spindle speeds: 0-18.000 rpm | Longitudinal travel (x): 3000 mm | Cross travel (y): 800 mm | Vertical travel (z): 720 mm | A-ax...

2017 Ofmer P44 bending machine

Machine info: Used Ofmer bending machine P44, 2017 Description: * Model P44EVO * 415V * RPM 6 * Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending; * A set of...

1987 PEDAX Special 42 S - Rebar bending machine

• Manufacturer: PEDAX

Machine info: Used Peddinghaus Special 42S Description: Structure and equipment of the Special S are analogous to the Perfect CC, but with more mature and sturdy electromechanical pin control and mechanical angl...

Small Pipe Bender

• Manufacturer: Kleine

Ex skibs navn: Wilson Skaw

2014 MEP Preform C+P

• Manufacturer: MEP

Machine info: Used MEP Preform C+P, 2014, good working condition.

2008 PEDAX Rotax 32 Spiral/radius bender

• Manufacturer: PEDAX

Machine info: Used Pedax Rotax (manual), 2008 Description: Extremely robust concrete reinforcing steel bar radii and spiral bending machine. Two performance classes for professional production, also available as...

Muhr & Bender rebar cross-conveyor

Machine info: Used Muhr & Bender cross-conveyor, 11 m (70cm bane)

KRB shearline H400

Machine info: Used KRB Shearline Blade width (mm): 500 | Cuts per minute: 10 | Machine type: Shearline | Single wire size: 55

Mega WeldMate

Machine info: 8 m version

Toyo bar bender B-52

• Manufacturer: Toyo

Machine info: Used Toyo B-52 bar bender

Oscam 87 2R radius bender

• Manufacturer: Oscam

Machine info: Used Oscam radius machine Description: To create hoops and spirals with rods from ø 6 mm up to ø 32 mm, with double speed. • Minimum diameter of hoops and spirals: approx. 300 mm with bars ø 12 mm ...

Oscam 87 2R radius bender

• Manufacturer: Oscam

Machine info: Used Oscam radius machine Description: To create hoops and spirals with rods from ø 6 mm up to ø 32 mm, with double speed. • Minimum diameter of hoops and spirals: approx. 300 mm with bars ø 12 mm ...

2005 PEDAX SpinMaster Classic

• Manufacturer: PEDAX

Machine info: Used Pedax Spinmaster from 2005 Description: The SpinMaster Classic is a high-capacity machine for producing non-welded rebar rollmats. 80 % reduction of installation time can be realised by simpli...

Coupling Flange with Shims between Blower

Inside diameter: 38,8 mm | Storage location: 15 C8

Coupling Flange D=100 mm d=35 and 37 mm

Storage location: 46 F1