Used Machine Tools in Saxony, Germany

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot, leveling footset, vibration isolator PAULSTRA V1H752-11 Material (all-metal cushioning pad) CrNi steel wire All-metal damper set consists of 4 feet! Used!

BO322

Column drill press ZMM METALLIK PAZARDJIK MK20 Vise: Motor: ELPROM A0100L8/4 0.7 / 1.1 kW 720 / 1430 rpm 380 V 3AC 2.5 / 3.2 A Used, tested!

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

HELLER chip conveyor

• Manufacturer: Heller

Chip conveyor HELLER type BEA 05 Drive motor: 0,3 kW 9.0 rpm 220 / 380 V 3AC, 50 Hz Coolant pump1: Q: 250 l/min, H: 13 m 1.7 kW 2850 rpm 230 / 400 V 3AC 50 Hz Coolant pump2: Q: 100 l/min, H: 2 m 0.24 kW 2750 rpm ...

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 10 pieces TARGET PRECISION Series 150 Other quantities on request! New! Â

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 16 pieces TARGET PRECISION Series 150 Other quantities on request! New!

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

HAM PRECISION micro drill

• Manufacturer: HAM PRECISION

Micro drill, head drill, drill, 33 pieces HAM PRECISION Ã 0.50 x 8.0 mm Other quantities on request! New!

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

PAGUS drill

• Manufacturer: Pagus

Twist drill RECA HSS Twist drills 29.75 - 50 mm MK Shank 29.75 /32/35/37/38/39 /39.75 /42/44/44/46/50mm 14 pieces Used!

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 45 pieces IND-SPHINX® PRECISION LIMITED D5463 D5463008000850000 Ã0.80x8.50mm Other quantities on request! New!

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drill, drill, 10 pieces IND-SPHINX® PRECISION LIMITED Type 100 10000023000900000 Ã2.30x9.00mm Other quantities on request! New!

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

IND-SPHINX® micro drill

• Manufacturer: IND-SPHINX

Micro drill, drill, 12 pieces IND-SPHINX® PRECISION LIMITED Type 3835 ( D835 ) D8350026001050000 Ã2.60x10.50mm New!