Used Machine Tools in Saxony, Germany

RÖHM clamping device

• Manufacturer: Röhm

Clamping device with 3-jaw chuck, 3-jaw chuck RÖHM Used!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 MT Motor: KMR 71 K 4 E 0.55 kW 1380 rpm 220/380 V 3AC used, checked!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric, with fan WMW EDU I80 EL Motor: KMR 71 K 4 E 0.55 kW 1380 rpm 220/380 V 3AC used, checked!

WMW hydraulic cylinder

• Manufacturer: WMW

Hydraulic cylinder, single-acting, spring return WMW Hydraulic Cylinder for UPW 63 Spare part for WMW UPW 63! unused!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMRB 71 G 4 F 0.75 kW 1380 rpm 220/380 V 3AC used, checked!

PAGUS bezel

• Manufacturer: Pagus

Bezel, bezel, steady rest, fixed PAGUS used, checked!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I160 Motor: KMR 71 K 2 E 0.75 kW 2800 rpm 220/380 V 3AC Mounting ring: diameter (inside /outside): Ø 137.8 /160 mm, width: 67 mm Internal thread: M140 x ...

WMW tensioning drive

• Manufacturer: WMW

Clamping drive, Clamping force generator, electric WMW EDU I160 Torque adjustable in 8 steps max. 110 Nm 160 rpm 220 /380V 3AC 0.75 kW Splined shaft profile according to TGL 0-5471 For more tensioning drives see ...

POREBA lunette

• Manufacturer: Poreba

Luenette, bezel, buttstock POREBA suitable for Poreba TPK-80! Used!

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, buttstock, fixed PAGUS Used! Inner diameter: Ø 350 mm | Center height: 460 mm | Foot: 540 x 200 mm | Hole distance: 330 mm | Counter pressure plate: 410 x 210 mm | Dimensions: 850 x 220 x 960 mm

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...