HC-U92 Multifunctional Concrete Ultrasonic Detector
Use the sound wave transmission method and ultrasonic method to detect the integrity of pile foundations, concrete strength, internal defects, crack width and depth in the fields of construction, transportation, ...
Shaoxing, China
HC-TC30 Mortar Strength Tester
HC-TC30 mortar strength pusher consists of a test fixture with a small hydraulic cylinder and a micro manual pump. It is mainly used to estimate the masonry mortar strength in walls with 240mm thick sintered ordi...
Shaoxing, China
HC Series Intelligent Bond Strength Tester
Suitable for testing the bonding strength of exterior wall facing bricks, exterior wall insulation materials, mosaics, various plates and paints. Stainless steel body, built-in micro hydraulic system; HC-2000A us...
Shaoxing, China
HC-HD92/HD852 Floor Thickness Tester
It is mainly used to measure the thickness of cast-in-place slabs, concrete or other non-metallic materials such as walls, columns, beams, wood and ceramics. This instrument is mainly based on the principle of el...
Shaoxing, China
HC-F900/F600 Concrete Crack Defect Comprehensive Tester
It uses ultrasonic and micro-camera technology, and is suitable for the detection of internal defects, crack depth, crack width of non-metallic materials such as concrete, graphite, nylon and their components, as...
Shaoxing, China
HCTJ-10T Carbon Fiber Bond Strength Tester
A new instrument suitable for testing the tensile bond strength between carbon fiber sheets and concrete in civil engineering structures. According to the bond strength and the failure mode during tension, the te...
Shaoxing, China
HC-GZ40/60 Micro Anvil
The average rate value of the bullet impact test on the micro steel anvil is [N] = 41 ± 2/60 ± 2
Shaoxing, China
HC-V1S/V3S/V5S/V10S Micro Puller
HC-VnS series micro puller is mainly used for anchor force detection of various anchors, such as anchor rods, steel bars and expansion bolts. Its test range is refined, fully in line with the latest standard requ...
Shaoxing, China
HC-RLT Steel Cage Length Tester
Detect the length of a single section of pipe pile and the total length; Detect the distribution of magnetic induction intensity in the borehole and determine the length of the steel cage according to relevant re...
Shaoxing, China
HC-TH01 Carbonation Depth Meter
HC-TH01 carbonization depth meter can be used with our company's HT-225T series rebound tester, and share the upper computer software for data analysis. This product integrates the company's latest research resul...
Shaoxing, China
HC-GZ3 High Strength Rebound Hammer Calibration Anvil
The average rated rebound value of the high-strength rebound tester on the Benxi steel anvil is [N] = 88 ± 2/83 ± 2
Shaoxing, China
HC-GZ1 Concrete Rebound Tester Calibration Anvil
The average rated rebound value of the concrete rebound tester on the steel anvil is [N] = 80 ± 2
Shaoxing, China
HC-HD91/HD90 Integrated Floor Thickness Gauge
The integrated floor thickness gauge is mainly used for thickness measurement of floor slabs, shear walls, beams, columns and other concrete structures, as well as non-magnetic media such as wood and ceramics. Re...
Shaoxing, China
HT-450A/550A High Strength Concrete Rebound Tester
Used for structural engineering high-rise building components, concrete components of bridges (plates, beams, columns, bridge frames), usually suitable for concrete compressive strength testing with strength grad...
Shaoxing, China
HT-450J / 450K/KC / 550J / 550K/KC Digital High Strength Rebound Tester Series
HT-450J/450K/KC digital high-strength rebound tester is used for structural engineering high-rise building components, bridges and concrete components (plates, beams, columns, bridge frames), usually suitable for...
Shaoxing, China
Tip: Enter manufacturer, model or keyword