Used Mineral Processing

Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643

• Manufacturer: Metso

Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

2-cell flotation bank No. 24 with capacity 50 CUFT Galigher brand Overview: Two-cell flotation bank designed for mineral concentration and separation by flotation. Made by The Galigher Co., renowned for its robus...

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

Two-cell float bank, No. 24, 50 cu ft capacity, GALIGHER brand No. 24 Used, in workshop Motor specifications: Manufacturer: ALLS-CHANLMERS Serial number: 1-5124-86631-1-21 General dimensions:

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

Two-cell float bank, No. 24, 50 cu ft capacity, GALIGHER brand No. 24 Used, in workshop Motor specifications: Manufacturer: STERLING A.C. MOTOR Serial number: M4512-4 General dimensions:

Auxiliary oil turbo pump nozzle plate 45 teeth Siemens brand

• Manufacturer: Siemens

Auxiliary oil pump nozzle plate, 45 teeth, Siemens brand Manufacturer: Siemens 45 teeth 6 holes Never used

Cummins 4089301RX PUMP WATER

• Manufacturer: Cummins

Cummins 4089301RX Water Pump Water pump Manufacturer: Komatsu Never used PCP

6x8 pump coupled to Cummins diesel engine

• Manufacturer: Sin Marca

6x8 pump coupled to Cummins diesel engine Coupled to Cummins diesel engine Mounted in mobile enclosed cabinet PCV Used

Spinktek ST-11-3 Disc Filter, Stainless Steel #4444671

• Manufacturer: Spinktek Systems

Spintek Systems Model number ST-11-3 stainless steel disc filter. Equipment is driven by under-mounted drive, direct connected to spinning discs. Rated for 3-phase, 60-cycle, 460 volt, 70 PSI. Unitized on portabl...

(New) Duplex 26 in x 26 in High Efficiency Mineral Jig

Duplex High Efficiency Mineral Jig. Please see specs tab below for capacities and requirements. Recovers higher placer gold values than riffles. Specifications if used as Rougher Jig Specifications if used as Cle...

Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644

• Manufacturer: FL Smidth

Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.

AGITAIR brand flotation cell system, 2.20 m long

• Manufacturer: AGITAIR

AGITAIR brand flowering cell system, 2.20 m long 5 mechanisms, 2.20 m long 1 m diameter pulley with 3 grooves 1 mechanism without pulley (MTY) 1 m diameter pulley with 3 grooves 1 mechanism without pulley Used, n...

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

2-cell flotation bank No. 24 with 50 CUFT capacity GALIGHER brand No. 24 Used, in workshop Motor specifications: manufacturer: ALLS-CHANLMERS serial no.: 1-5124-86631-1-16 General dimensions:

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

Two-cell float bank, No. 24, 50 cu ft capacity, GALIGHER brand No. 24 Used - Not in service Motor specifications: Manufacturer: ALLS-CHANLMERS Serial number: 51-472-167-261 General dimensions:

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

2-cell flotation bank No. 24 with capacity 50 CUFT GALIGHER brand No. 24 Used, in workshop Motor specifications: manufacturer: STERLING A.C MOTOR serial no.: W4512-7 General measurements:

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

Two-cell float tank, No. 24, 50 cu ft capacity, GALIGHER brand No. 24 Missing pulley Used, in workshop Motor specifications: Manufacturer: STERLING A.C. MOTOR Serial number: W4512 General dimensions: