Used Mineral Processing

GMS 3-Deck Wash Plant

• Manufacturer: Global Mining Solutions

Mounted on I-Beam Skid Comes with Water Manifold Overall Dimensions:

4ft x 12ft Shaker Deck Gold Wash Plant

Hopper/Pan Feeder All Mounted on 4 Wheels Style: Portable | Throughput capacity: Approx. 60 YPH | Screen deck: 12ft 3in Long x 4ft Wide | Sluice box deck: 11ft 4in Long x 4ft Wide | Spray bars: Needs new Piping a...

Portable 15 YPH Gold Wash Plant

Mounted on 4 Wheels Electric Brakes Style: Portable | Throughput capacity: Approx. 15 YPH | Feed hopper: 8ft Wide x 8ft Long | Discharge opening: 28in Wide | Screen: Steel Shafts | Sluice box deck: 50in Wide x 10...

Marcy 13 ft. 6 in. x 4 ft. SAG Mill

Dry grind type. 13 ft. 6 in. (4.2 m) dia. 4 ft. (1.2m) long. 300 hp motor (224 kW). Contact for more information.

Denver DR 24 Impellor and Diffuser Rubber Parts

- Lot of 10 Units: Denver DR 24 Impellers and Diffusers - Impellers: Natural rubber, bolt on type, 9 vane - Diffusers:  Natural rubber, 16 fins, 6” deep - Year of manufacture: 2013 - Condition: Unused surplus

Sub-A Denver-Style Flotation Cell Parts Kits

Wear and spare parts kits for Denver-style Sub-A flotation cells - Parts fit original Denver Sub-A cells as well as D'Angelo Sub-A flotation cells - Wear parts use hot vulcanized 520 black rubber - Parts diagram ...

Wemco-Style Flotation Cell Parts Kits

• Manufacturer: Wemco

Replacement wear and critical spare parts for Wemco-style flotation cells - Parts fit Wemco original cells and D'Angelo Wemco-style cells - Refer to table below for models available - Wear material is vulcanized ...

Denver-Style DR Flotation Cell Parts Kits

New manufacture parts kits for Denver-Style DR flotation cells - Parts are interchangeable with original Denver DR cells or D'Angelo's DR-style cells - Standard wear part material is 520 natural black rubber - Ru...

30 x 7 ft (9.1 x 2.1 m) Allis Chalmers ( Metso) SAG Mill components with 4079 HP motor, 200 RPM

• Manufacturer: Allis-Chalmers

Allis Chalmers 30 x 7 ft SAG - Westinghouse AC brushless synchronous motor with spare stator: - 4079 HP (3000 kW) - 200 RPM - 3300 V - 50 Hz Mill includes: - Bull gear - Pinions - Lube units - Slide shoe bearings...

Steel grinding balls

- Used steel grinding balls - 3 inch minus, majority are 1.5-2.5 inches - Cleaned and stored in barrels - Ready for shipment - Large quantity available

Eaton 38 VC 1200 Air clutch

• Manufacturer: Eaton

Complete new and unused Eaton airflex clutch 1- 38VC1200 Element ASSY 2 SC 1- I.O.M Manual 1 1 - 38VC1200 Drive hub 1 - 38VC1200 Male reg drum 2 - Hose assembly 1 - 38VC1200 Spider Inquire about other Eaton clutc...

Hydraulic Grinding Mill Inching Drive

Hydraulic Grinding Mill Inching Drive Mechanically connects to the non-drive end of the primary pinion A flanged hub on the output shaft of the reduction unit slides over to bolt to the existing hub on the pinion...

Mill, Sag, 38' X 25'5", Metso, 26,000 HP, Unused #D739652

• Manufacturer: Metso

Unused Metso grate discharge sag mill trommel with replacement panels, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,000 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 60 Hz. EGL: 22' (6.7...

DENVER 5086

• Manufacturer: Denver

Spare parts for CF18 Y 18 flotation cells DENVER SUB-A type Agitator for CF18 Y 18 SP SUB-A mechanism PCV New

METSO OUTOTEC e200

• Manufacturer: Metso

Tank Size: LOT of 6 UNUSED METSO OUTOTEC Forced Air TankCell e200 Flotation Cells Forced Air 200m3 Flotation Cells 7,049 ft3 (6) Motors, 250 HP (185 kW) Rotor FloatForce 1500 Stator Wear Parts FloatForce 1500 Gea...