Used Processing in Piedmont, Italy

DEMAG - ERGOTECH 1000-310 - Plastic injection molding machine - 1995

• Manufacturer: Demag
• Model: Ergotech

Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mould height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm M...

HTST PLATE PASTEURIZER for liquid products

• Manufacturer: TAS Impianti

PLATE PASTEURIZER FOR LIQUID PRODUCTS HTST pasteurizer with plate heat exchanger for continuous pasteurization of liquid products. The machine allows the pasteurization of liquid food products such as milk, beer,...

TAS Impianti Hot Air Dryer - Our "ES12" model

• Manufacturer: TAS

Hot air dryer - Ns. mod. "ES12" The machine was conceived, designed and manufactured with the aim of reducing moisture in granular food products. Entirely made of aisi 304 stainless steel for product contact part...

TAS Impianti Hot Air Dryer - Our "ES12" model

• Manufacturer: TAS

Hot air dryer - Ns. mod. "ES12" The machine was conceived, designed and manufactured with the aim of reducing moisture in granular food products. Entirely made of aisi 304 stainless steel for product contact part...

ROBOPAC - ROTOPLAT 508 PDS - Pallet packer - 2022

• Manufacturer: Robopac
• Model: Rotoplat

Machine dimensions: approx. 4200 x 1700 x 2700 mm Maximum packing height: approx. 2400 mm Base diameter: approx. 1650 mm Warning: the information reported has been taken on board the machine using measuring ...

INGERSOLL RAND - R55N-A10 - Screw Compressor with Chiller - 2015

• Manufacturer: Ingersoll Rand
• Model: R55N

Maximum operating pressure: 10 bar Power: 55 kW Revolutions per minute: 2990 rpm Dimensions: approx. 2400 x 1250 × 2050 mm Including chiller, dimensions: approx. 900 × 720 × 1400 mm Warning: the informati...

CORDIVARI - Tank

Approximate dimensions: D800 x 1800 mm Maximum storage pressure: 6 bar Maximum storage temperature: 60 °C Minimum storage temperature: -10° C Warning: the information reported has been taken on board the mac...

KAESER - CS91 - Screw compressor

• Manufacturer: Kaeser
• Model: CS

Operating pressure: 7.5 bar Size: approx. 2400 × 1250 × 1450 mm Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further informati...

KAESER - CS91 - Screw compressor

• Manufacturer: Kaeser
• Model: CS

Operating pressure: 7.5 bar Size: approx. 2400 × 1250 × 1450 mm Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further informati...

INGERSOLL RAND - R75N-A10 - Screw Compressor - 2018

• Manufacturer: Ingersoll Rand
• Model: R75N

Operating pressure: 10 bar Power: 75 kW Revolutions per minute: 3420 rpm Approximate dimensions: 2500 x 1300 x 2100 mm Warning: the information reported has been taken on board the machine using measuring...

FREUTEK JUB0003 Screw Compressor 15 kW

Screw Air Compressor 15kW. Current: 20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubr...

FREUTEK LON0001 Cordless Electrical Strapping Machine

Battery strapping machine for polyester strap with vibration welding. Designed to apply high tensions to the strap, it has a maximum tensioning capacity of 2800 N expressly designed for polyester, PP or PET strap...