Used Materials Testing in Shandong, China

Electromechanical Calibration for Transducer

● Max. Load: 500kN Deviation of Load Value: 0.05% ● Load Repeatability: 0.05%● Sensitivity: 0.02%● Accuracy: ≤±0.0005%F.S● Stabilization Time at Any Point: ≥30min● Load/unload Time: any time set● Load Speed: 0.00...

HBV-30A BRINELL & VICKERS HARDNESS TESTER

• Manufacturer: Vickers

DX-400 Gauging Length Instrument of Tensile Specimen

• Manufacturer: JINAN LIANGONG TESTING TECHNOLOGY

1. Overview DX-400 Manual Tensile Specimen Gauge Length Meter is the specialized equipment which is designed and made according to national standard GB/T228-2010. Gauge length is correct, high-efficient and easy ...

Knife Edges for Extensometers

• Manufacturer: jinan testing equipment ie

Patent technology of TE: Auto calibration for load & extensometer

• Manufacturer: TE

TE electronic calibration module provides an easy way to calibrate load cell or extensometer and signal conditioning electronics without using a mechanical calibrator. It enables performing on-site electrical cal...

Patent technology of TE: Auto calibration for load & extensometer

• Manufacturer: jinan testing equipment ie

TE electronic calibration module provides an easy way to calibrate load cell or extensometer and signal conditioning electronics without using a mechanical calibrator. It enables performing on-site electrical cal...

Hardness Tester

Hardness Test:Hardness is the property of a material that enables it to resist plastic deformation, usually by permanent indentation. Indentation hardness measures the resistance of a sample to material deformati...

TGLC series Hydraulically Sample Punch

• Manufacturer: TGLC

TGLC series hydraulically sample punch is widely used in sample preparation of ferrous metals, nonferrous metals and non-metal plate material etc; It is idea sampling equipment for tensile testing and bending tes...

Axial Extensometer-Model 3542

• Manufacturer: Epsilon Technology Corp

These extensometers are designed for testing a wide range of materials, including metals, plastics, composites and ceramics. All will work in both tension and compression. The dual flexure design makes them very ...

Bi-Axial or Axial Averaging Extensometers – Model 3560

• Manufacturer: Epsilon

This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson’s ratio. The Model 3560BIA uses a design unique to E...

TE-UV2 Manual / Hydraulic

TE-UV2 Manual / Hydraulic Notch Cutter for Impact Specimen is specially designed for specimen preparation for impact specimen. Both manual type and hydraulic type are available to cutting the notch according to t...

High Temperature Clip-On Gages (700 °C) – Model 7641

These COD gages use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testing. The Model 7...

Circumferential Extensometers – Model 3544

Circumferential extensometers measure the change in circumference as the sample is compressed. This is considered by many researchers to be a more accurate way to determine diametral strain, since the measurement...

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester

• Manufacturer: Vickers

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester Basic Structure Digital Micro Vickers Hardness Tester with Auto Turret HV-5MD HVS-M-AXYZF Auto Control, Measurement & Data Image Processing System Main Appli...

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester

• Manufacturer: Vickers

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester Basic Structure Digital Micro Vickers Hardness Tester with Auto Turret HV-5MD HVS-M-AXYZF Auto Control, Measurement & Data Image Processing System Main Appli...