Used Processing in Wallonia, Belgium

Filter for sandsilo 650 x 650 x 700mm

Without ventilator and vibrating motor, for putting on silo

Sandhopper, 2,5 - 3 m³

Suitable for discharging belt Outside dimensions: 2450 mm x 1400 mm, h. 2600 mm

Transport belt, 2600 mm x 630 mm

Outside dimensions troughed belt: 3500 mm x 1000 mm x 4550 mm With cleaner and switch on each side for rip cord Motor and turn pulley Ø 360 mm Block Ø 89 mm Without gear motor

Alu gib 1400x840mm

Surface machined, without feet Weight: ± 100 kg | Outside dimensions: 1400 x 840, h. 100mm | Usesful dimensions: 1400 x 840mm

Pressurized air tank on feet 1500 l, EC-Norm

• Manufacturer: MASCHINEN + BEHÄLTERBAU

Type: MB020102-1,1500G, serial number: BA43853201 With 2 valves, 1x for pression, 1x for water emptying EC no 0035 11 bar maximum

Sand hopper on feet, ± 1,2 m³

Sketch in annex Weight: 300 kg | Outside dimensions: 1015 mm x 1015 mm, h. 2680 mm | Inside dimensions: 930 mm x 930 mm, h. 1300 mm

Beltgrinder for laboratory LECO

• Manufacturer: Leco

Type : 800-500, Serial number: 309 Inside width 100mm 220 V mono, 7,5 A Belt width 100 mm, type BG20

Rubberbelt conveyor KELLER 4000mm x 500mm

• Manufacturer: Keller

Tube construction, driven by trapez belt Outside dimensions: 4300 mm x 950 mm | Motor: 2,2 KW, 3 hp, 1440 rpm, 220/380 V

Small rubberbelt conveyor AXMANN, W500mm

• Manufacturer: Axmann

Axdistance 1500 mm, 4 rolls , band on feet With bunker

Rubber belt conveyor VEB/DDR, useful length 1300 mm, tape width 500 mm

Drum motor 4 kW, 220/380 V Tube construction, barrel Ø 320 mm

Vibrating conveyor, length 1000 mm, width 300 mm

Motor type DSR31.0075.4; 0,9 kW, 400 V, 500 Hz, 980 rpm Conveyor 1000 mm x 300 mm 2 vibrating motors at the side On 4 silent blocks

Fish mouth container

For transport over lift truck or overhead crane The fish mouth opens via a small pneumatic cylinder

Sandsilo, 3.5 - 4 t, ± 2 m³

On 4 feet, 1600 mm x 1600 mm Weight: 250 kg | Exterior height: 2500 mm | Useful dimensions: Ø 1300 mm, h. 2000 mm | Cylinder height: 1000 mm | Cone height: 1000 mm

Single sanding disc Ø 520mm, with table 650x200mm

Driven by 3 trapezoid belts, on iron foot Outside dimensions: 1003 x 1000, h. 1200 mm | Motor: 5 KW, 220/380 V, 1430 rpm

Rubber belt conveyor VEB/DDR 2500 mm x 500 mm

- center distance 2150 mm; length 2800 mm - center distance 2400 mm; length 2900 mm - center distance 2500 mm Tube construction, drum Ø 300 mm