Used Processing in Flanders, Belgium

Eisenmann Auto Powdercoat unit

• used

• Manufacturer: Eisenmann

Auto controlled powdercoat station: - movable on rails - with own recuperation- filter installation - with 2 robots - each robot has 3 pistols Entry dimensions of tunnel: 1000 width x 1800 height

Eisenmann manual powdercoat unit

• used

• Manufacturer: Eisenmann

Manual controlled powdercoat station: - movable on rails - with own recuperation- filter installation Entry dimensions of tunnel: 1000 width x 1800 height

Plastic Extrusion Plant production of plastic pipes and

• used

• Manufacturer: Plastic Extrusion Plant

Complete plastic extrusion plant for production of plastic pipes and tubes in PP/PE/PS/ABS/PVC... Including 6 extrusion lines, make Samafor, Yvroud and Andouart See U.10 6350 / U.10 6351 / U.10 6352 / U.10 635...

Redirack Production line for making industrial racks

• used

• Manufacturer: Redirack

Complete production line for producing several types of industrial pallet (including all tools) 1st line Rollsec rollforming line + decoiler + Soenen flying cutting shear/4 column for making horizontal supports ...

Complete line for fixtures of fluorescent lighting

• used

• Manufacturer: Complete line

The line consists of: - 4 CNC press profile lines LVD pressbrake PP 70 ton x 2500mm + Dimeco decoiler + Dimeco CNC feeder/straightener click here LVD pressbrake PP 70 ton x 2500mm + Dimeco decoiler + Dimeco...

Atlas-Copco GA18 + FD506

• used

• Manufacturer: Atlas-Copco
• Model: GA 18+

Motor: 18.5 kW Start Amps: 84.9 Amps / Full load: 36.4 Amps

Atlas-Copco GA90VSD + FD230

• used

• Manufacturer: Atlas-Copco
• Model: GA 90

tank 2000 liter capacity: 16,2 m3/min pressure: 7,5 bar power: 90 kW with FD230 air dryer

Andouart Ø 26 mm

• used

• Manufacturer: Andouart

Extrusion of plastic tubes max Ø 26 mm screw Ø 60 11 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81 click here S...

Andouart Ø 26 mm

• used

• Manufacturer: Andouart

extrusion of plastic tubes or profiles Max Ø 26 mm Screw Ø 60 14 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81...

Future Controls Ms-101 Injection mold-testing device

• used

• Manufacturer: Future Controls Ms-101

Mold Sampler: device for making prototype moulds. A plastic substance is heated and injected into the mould. mounted on mobile table incl accessories pressure: 4-6kg/cm2

Netstal N235-90MP injection moulding

• used

• Manufacturer: Netstal

klemkracht 900 kN injectiekracht 196 kN openingsruimte 125 - 300 mm matrijsruimte 200 - 500 mm inbegrepen: tempereereenheid trechter / mixer zonder gereedschap

2010 PR625-N-IR 7/170-N

• used

• Manufacturer: PR625-N-IR

Technical information: 2870*** | Capacity [m³/min]: 17 | Pressure [bar]: 7 | Engine: John Deere 6068HF285 | Stars: Very Good | Weight [kg]: 2870 | Power [kw]: 129 | Hours (on hour meter): 1164 | Outside conditio...

ATLAS COPCO E-AIRH250

• used

• Manufacturer: Atlas-Copco

Capacity [m³/min]: 6.6 - 5 | Pressure [bar]: 5 - 12 | Engine: Electrical | Weight [kg]: 749 | Power [kw]: 37 | Outside condition: Excellent | Ce mark: ok | Length [m]: 2.765 | Width [m]: 1.346 | Height [m]: 1.43...

ATLAS COPCO GA1107.5

• used

• Manufacturer: Atlas-Copco
• Model: GA 1107.5

2005 ATLAS COPCO GA30Cspares

• used

• Manufacturer: Atlas-Copco
• Model: GA 30

Capacity [m³/min]: 4.98 | Pressure [bar]: 7.5 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: SPARES | Stars: Good