Used robotics

Trusted Seller
2023 INDEX G 420
- used
- Manufacturer: Index
- Control: SIEMENS 840 D Solution Line
Control: SIEMENS 840 D Solution Line | Number of turning spindles: 2 | Number of milling heads: 1 | Number of revolvers: 2 | Number of positions turret 1: 12 | Number of positions turret 2: 12 | Spindle nose hsk...
Brügg, Switzerland
Trusted Seller
2020 MORI SEIKI NTX 3000 /1500 2nd Gen.
- used
- Manufacturer: Mori Seiki
- Control: CNC, F31iB5 Celos
mainspindle wit 2 clamping pressures, separate adjustable automatic travel control for cylinder of main spindle sub spindle 2 level clamping pressure for chuck automatic travel control for cylinder subspindle sec...
Ispringen, Germany
Trusted Seller
Matsuura MC-900HG-PC10 I Horizontal Machining Center
- used
- Manufacturer: Matsuura
- Model: MC900HG
- Spindle Taper: BT50
- Control: Fanuc 16i-M
We hereby offer this used Matsuura MC-900HG-PC10 horizontal machining center from 1999, located in Finland. Equipped with the advanced Fanuc 16i-M control unit. It features 630 x 630 mm pallet dimensions, enablin...
$26,894 USD
Get financing
Est. $506/mo
Finland
Trusted Seller
2000 DIGMA 500 GC
- used
- Manufacturer: DIGMA
- Control: HEIDENHAIN Atek HS Plus
Control: HEIDENHAIN Atek HS Plus | Number of axis total: 3 | Table length: 550 mm | Table width: 450 mm | Number of t-channels: 5 | Distance of the t-slots: 80 mm | T-channel width: 18 mm | Longitudinal travel (...
Brügg, Switzerland
Trusted Seller
2008 MAKINO V 33i Graphite
- used
- Manufacturer: Makino
- Model: V33I Graphite
- Control: MAKINO PROFESIONAL 5
Control: MAKINO PROFESIONAL 5 | Time under power: 124789 Heures | Operating time: 41099 Heures | Working time: 33577 Heures | Spindle run time: 37924 Heures | Number of axis total: 3 | Table length: 750 mm | Tab...
Brügg, Switzerland
Trusted Seller
2010 DMG DMC 55H duoBLOCK
- used
- Manufacturer: DMG Mori
- Model: DMC 55 H DUOBLOCK
- Control: HEIDENHAIN iTNC 530
Control: HEIDENHAIN iTNC 530 | Time under power: 75886 Heures | Operating time: 27052 Heures | Number of axis total: 4 | Number of spindles: 1 | Table load max.: 500 kg | Longitudinal travel (x-axis): 560 mm | T...
Brügg, Switzerland
Trusted Seller
2002 Homag door production with gluing unit and KUKA robot BOF / BAZ20/50/18/2/D 99857
- used
- Manufacturer: Kuka
- Control: Homatic PC 83
Control: Homatic PC 83 | Software: Woodwop | Workpiece width min-max mm: 1600 | Workpiece length min- max mm: 800 - 3500 | Workpiece height min- max mm: 12 - 60/120 | Working area x: 5800 | Working area y: 1600 ...
Petershagen, Germany
SIEMENS ABB ROBOTICS MOTOR 1FT 3044-5AZ21-9-Z 3H AA 2120-1 WARRANTY EACH 1
- used
- Manufacturer: Fanuc
OUR PARTS ARE NOT TESTED BUT WE FULLY STAND BEHIND. THIS PART WAS REMOVED FROM AN OKUMA MC-500H CNC HORIZONTAL MILL THAT WE DISMANTLED.
$300 USD
Santa Clarita, CA
SIEMENS ABB ROBOTICS MOTOR 1 FT 3034-5AZ21-9-Z 3H AA 2119-1 LOT OF 3 PIECES
- used
- Manufacturer: Fanuc
OUR PARTS ARE NOT TESTED BUT WE FULLY STAND BEHIND. THIS PART WAS REMOVED FROM AN OKUMA MC-500H CNC HORIZONTAL MILL THAT WE DISMANTLED.
$600 USD
Santa Clarita, CA
Mitsubishi - Servo Amplifier MDS-CH-V1-150
- new
- Manufacturer: Mitsubishi
- Model: µV1
MDSCHV1150 SERVO DRIVE SERVO AMPLIFIER SERVO DRIVE UNIT AXIS CONTROL CNC **100% Tested with State-of-the-art equipment** If you need a specific firmware or series relating to MDS-CH-V1-150, we probably have it. P...
$3,500 USD
Progreso Lakes, TX
Mitsubishi - Servo Drive MDS-C1-V2-1010
- new
- Manufacturer: Mitsubishi
- Model: µV1
**Customer responsible to ask for Software Version to avoid compatibility issue. Restock fee applies due to Software Version required** **100% Tested with State-of-the-art equipment** If you need a specific firmw...
$2,500 USD
Progreso Lakes, TX
Mitsubishi - Servo Drive MDS-C1-V1-20-N
- refurbished
- Manufacturer: Mitsubishi
- Model: µV1
SERVO DRIVE UNIT CNC **Customer responsible to ask for Software Version to avoid compatibility issue. Restock fee applies due to Software Version required** **This is guaranteed to be in working conditions** *$40...
$2,200 USD
Progreso Lakes, TX
Mitsubishi - Servo Drive MDS-R-V1-40
- new
- Manufacturer: Mitsubishi
- Model: µV1
**100% Tested with State-of-the-art equipment** If you need a specific firmware or series relating to MDS-R-V1-40, we probably have it. Please call or email us with your request. *Ask For Core Exchange Credit*
$2,200 USD
Progreso Lakes, TX
Mitsubishi - Servo Drive MDS-R-V1-40
- refurbished
- Manufacturer: Mitsubishi
- Model: µV1
**100% Tested with State-of-the-art equipment** If you need a specific firmware or series relating to MDS-R-V1-40, we probably have it. Please call or email us with your request. *Ask For Core Exchange Credit*
$1,900 USD
Progreso Lakes, TX
Mitsubishi - Spindle Drive MDS-E-V1-80
- refurbished
- Manufacturer: Mitsubishi
- Model: µV1
**Customer responsible to ask for Software Version to avoid compatibility issue. Restock fee applies due to Software Version required** **100% Tested with State-of-the-art equipment** If you need a specific firmw...
$1,750 USD
Progreso Lakes, TX