- Trusted Seller
18 MM Leistritz Twin Screw Extruder, Model MIC18PH/GL-35D
used
- Manufacturer: Leistritz
18 MM Leistritz Twin Screw Extruder, Model MIC18PH/GL-35D Used Leistritz twin screw extruder, model MIC18PH/GL-35D, 18 mm screws, co-rotating screws, 35:1 l/d, 500 rpm screw speed, electrically heated, water cool...
Cleveland, OH - Trusted Seller
LCI Fuji Paudal MultiGranulator Extruder, Model MG-55
used
- Manufacturer: Fuji Paudal
LCI Fuji Paudal MultiGranulator Extruder, Model MG-55 LCI (Fuji Paudal) Multi-Gran, MultiGranulator Lab Extruder, Model MG-55, SN 351155, (In Shared Crate).
Cleveland, OH - Trusted Seller
3 Roll Sheet Stack Davis-Standard 1.25" Extruder Line
used
- Manufacturer: Davis-Standard
3 Roll Sheet Stack Davis-Standard 1.25" Extruder Line 10" 3 roll sheet stack line, consisting of: 1.25" Davis Standard extruder, model DSPW-125V-H24, 24:1 L/D, electrically heated, water cooled with circulation p...
Cleveland, OH - Trusted Seller
Davis Standard 6" Single Screw Extruder System
used
- Manufacturer: Davis-Standard
6" Davis Standard Single Screw Extruder • 400 HP DC motor and Drive • Set up for water cooling, some heater bands have been replace with ceramic heaters non water cooling. • 8 zones barrel zones 5 die zones ...
- Trusted Seller
19 mm Baker Perkins Twin Screw Extruder, Model MP-19-TC
used
- Manufacturer: Baker Perkins
19 mm Baker Perkins Twin Screw Extruder, Model MP-19-TC Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 40:1 l/d, electrically heated, water cooled barrel, spl...
Cleveland, OH - Trusted Seller
53 mm W & P Twin Screw Extruder, 40:1 L/D
used
- Manufacturer: WP
53 mm W & P Twin Screw Extruder, 40:1 L/D Used Werner & Pfleiderer twin screw extruder, model ZSK53, 53mm twin screws, co-rotating, 40:1 L/D, electrically heated, water cooled barrel with (7) barrel sections, 60 ...
Cleveland, OH 
Farrel 15" Rubber Dump Extruder
used
- Manufacturer: Farrel
Item 6328 - One (1) Used Farrel 15” Rubber Dump Extruder, drop extruder, hot feed extruder, feed opening 36” wide x 24.5” deep, stuffer ram 35” wide x 8” thick with 13” stroke, 95:1 total gearbox reduction (19.4:...
Cleveland, OH- Trusted Seller
19 MM APV Baker Perkins Twin Screw Extruder, Model MP-19-TC
used
- Manufacturer: APV - Gaulin
19 MM APV Baker Perkins Twin Screw Extruder, Model MP-19-TC Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 25:1 l/d, electrically heated, water cooled barrel,...
Cleveland, OH - Trusted Seller
Fuji Paudal LCI Twin Dome Extruder Screen, .8 mm
used
- Manufacturer: Fuji Paudal
Fuji Paudal LCI Twin Dome Extruder Screen, .8 mm Used Fuji Paudal LCI TDG-110PA Twin Dome Extruder Screen, .8 mm.
Cleveland, OH - Trusted Seller
3 Roll Sheet Stack Davis-Standard 1.25" Extruder Line
used
- Manufacturer: Davis-Standard
3 Roll Sheet Stack Davis-Standard 1.25" Extruder Line 10" 3 roll sheet stack line, consisting of: 1.25" Davis Standard extruder, model DSPW-125V-H24, 24:1 L/D, electrically heated, water cooled with circulation p...
Cleveland, OH - Trusted Seller
Fuji Paudal LCI Twin Dome Extruder Screen, .8 mm
used
- Manufacturer: Fuji Paudal
Fuji Paudal LCI Twin Dome Extruder Screen, .8 mm Used Fuji Paudal LCI TDG-110PA Twin Dome Extruder Screen, .8 mm.
Cleveland, OH 
NRM Duplex Extruder | 5122
used
- Manufacturer: NRM
Item 5122 - One (1) Used NRM 6 x 6 Duplex Extruder, 20” wide tread head, Reliance 100HP DC 1750/2000RPM 500V motor. NOTE only (1) extruder included.
Cleveland, OH
Troester 90mm Extruder
used
- Manufacturer: Troester
Item 6043 - One (1) Used Troester 3.5" 90mm Cold Feed Extruder, 16:1 L/D, forced lube system, PFR power feed roll, feed roller equipped with external bearings and adjustable scraper blade
Cleveland, OH- Trusted Seller
55mm Bore Reifenhäuser Plastic Pellet Extrusion Extruder
used
- Manufacturer: Reifenhäuser
Typ: RH-501-1-70-33-V Single screw Vented and plugged Air cooled; Electrically heated. Suitable for HDPE and many other types of plastics.
Flender 6" Plastic Extruder
used
- Manufacturer: Flender
One (1) Used Flender 6" (150mm) Plastic Extruder, 30:1 L/D, no motor, direct drive, lowboy gearbox, unitized base, rated at 500 HP (372 KW)
Cleveland, OH
Battenfeld Uni-Ex Extruder
used
- Manufacturer: Battenfeld
- Model: Uni-Ex
Good condition Battenfeld Uni-Ex Extruders manufactured in 1985. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword