Used Foundry & Casting in Wallonia, Belgium

Trusted Seller
2000 Returner of moulding boxes
- used
- Manufacturer: ELMEC
External dimensions: length: 1220mm; width: 450mm; height: 950mm 4kW; 400V; 1,4A With CE
Amel, Belgium
Trusted Seller
1997 Core sand reclamation with pneumatic sand feeder
- used
- Manufacturer: Segab
Core sand crusher With 2 vibration motors; 4kW With steel construction and intermediate hopper Pneumatic conveyor: With old control cabinet SIEMENS S5
Amel, Belgium
Trusted Seller
2024 Small round coating basin ±80l MJS
- used
- Manufacturer: MJS
External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...
Amel, Belgium
Trusted Seller
Small round coating basin ±0,35m³
- used
External dimensions: length: 1500mm; width: 950mm, height: 1530mm Usable dimensions: Ø850mm; depth: 700mm Capacity ±0.35m³ For water sizing With 1 agitator; 0.37 kW With forklift feet and castors
Amel, Belgium
Trusted Seller
Permeability tester GF, type SPDU
- used
- Manufacturer: GF
External dimensions: Width 400 mm, Depth: 230 mm, Height 480 mm
Amel, Belgium
Trusted Seller
Laboratory vibrating sieve ENDECOTTS
- used
- Manufacturer: ENDECOTTS
With 10 sieves With timer With CE mark Power: 220 V; 50 Hz | Weight: 83 kg
Amel, Belgium
Trusted Seller
2000 Central amin distributor LÜBER, 300 l
- used
- Manufacturer: Lüber
Dimensions: Length: 1350mm; width: 900mm; height: 2290mm With SIEMENS S7 control system 3x400V; ±3kW; 50Hz With pump With flow meter
Amel, Belgium
Trusted Seller
2000 Gassing unit LÜBER LW FDA-16401i, 16kW
- used
- Manufacturer: Lüber
Dimensions: Length: 1100mm; Width: 1000mm; Height: 1863mm With heating 16 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas dos...
Amel, Belgium
Trusted Seller
1987 Double sandpapering machine Ø900mm ZIMMERMANN
- used
- Manufacturer: Zimmermann
Dimensions: length: 1300mm; width: 1610mm; height: 1550mm Useful width: Tables: 1200x400mm With emergency stop Table angle digitally adjustable
Amel, Belgium
Trusted Seller
Permanent overband magnet GOUDSMIT width 735mm
- used
- Manufacturer: Goudsmit
Dimensions: Length: 2000mm; Width: 1250mm; Height: 600mm Useful dimensions: Width: 735mm Without drive motor, can be equipped later
Amel, Belgium
Trusted Seller
2016 Stainless dosing screw with small hopper
- used
- Manufacturer: Omega
With long cable with agitator and level detector "full"
Amel, Belgium
Trusted Seller
2014 Core shooter LAEMPE LL10
- used
- Manufacturer: Laempe / Röperwerk
Core shooter: Shooting volume: 15 litres (was expanded later for larger shot volumes) Dimensions of the machine: Length: 2100mm; Width: 2050mm; Height: 2080mm For horizontally and vertically separated core boxes ...
Amel, Belgium
Trusted Seller
Rotating molding machine KÜNKEL WAGNER WPM3
- used
- Manufacturer: Künkel Wagner
- Model: WPM 3
Dimensions: Length: 2850mm; Width: 1400mm; Height: 2300mm With control cabinet With control panel
Amel, Belgium
Trusted Seller
Core shooter RÖPER / GENTEN H2,5
- used
- Manufacturer: Laempe / Röperwerk
Overhauled by GENTEN in 2014 Dimensions: Length: 1710mm; Width: 1290mm; Height: 2140mm Monobloc cabin Cabin with 3 doors secured by limit switches Pneumatic doors for core removal With discharge slide With origin...
Amel, Belgium
Trusted Seller
Core sand batch 50 L GIETARD
- used
- Manufacturer: GIETARD,
Dimensions: Length: 1000mm, Width: 750mm, Height: 1000mm, manual emptying flap 250x150mm, Without protective grid on mixing bucket With manual discharge flap with motor protection and coupling, Mixing arm 40 rpm....
Amel, Belgium