Building Filters
- Trusted Seller
Valid VT-1000
- Manufacturer: Valid
Valid VT-1000 VTL - Fanuc Control, 39.3" 4-Jaw Chuck, Coolant Through Ram, Chip Conveyor, (2) New Machines Available. Photos are from Identical Machine Running in Plant.
Phoenix, AZ - Trusted Seller
SAMAG TFZ 3L-1,500 CNC Deephole Boring Machine
- Manufacturer: Samag
Heidenhain iTNC 530 CNC Control Coolant System – 30 bar with 115 L/minute to 90 bar with 30 L/minute Tool Changer – 32 Position x (4×8) Max Tool Diameter (all spaces occupied) 148 mm Max Tool Length 400 mm Max T...
Marietta, GA - Trusted Seller
Ritter R2063 6° Low Angle Pocket Screw Machine
- Manufacturer: Ritter
This is the NEWEST Pocket Screw machine from Ritter, released in 2021. In our opinion, it is the best machine out there. Remember, unlike drill tubs, these machines route the low-angle pocket. The low-angle pocke...
Kingston, TN - Trusted Seller
Ritter R2061 6° Low-Angle Pocket Screw Machine (Single Phase)
- Manufacturer: Ritter
The R2061 is the NEWEST Low-Angle Pocket Screw machine from Ritter, released in 2021. In our opinion, it is the best machine out there. Remember, unlike drill tubs, these machines route the low-angle pocket. The ...
Portable Line Boring Sets
- Manufacturer: International Revere Machining
Designed and manufactured in USA. Portable Line Boring Equipment: We offer high-quality, adaptable Line Boring Sets designed for reliable performance across various industries. Our portable sets are ideal for o...
Chicago, IL
1978 160″ VBM Summit Vertical Turret and Boring Lathe
- Manufacturer: Summit
- Model: VBM
PRESSURIZED LUBRICATION SYSTEM LEVELING SCREWS WITH MOUNTING PADS BUILT IN POWER RAPID REVERSE TO ALL HEADS WIPERS ON ALL WAYS CENTRALIZED CONTROL PANEL FOR ALL OPERATIONS ON SWIVEL ARM FULL LENGTH BRONZE TAP...
Bay Shore, NY- Trusted Seller
FERMAT/LUCAS Table Type Horizontal Boring Mill Model WFT R 15 CNC Spindle Diameter 5.91" X axis 157.5" x Y axis 98.5"
- Manufacturer: Fermat
- Model: WFT 15
- Spindle bore: 150.11 mm
FERMAT/LUCAS Table Type Horizontal Boring Mill Model WFT R 15 CNC Spindle Diameter 5.91" X axis 157.5" x Y axis 98.5" FERMAT began in 1990 and was founded by Jiří Ferenc and Mr. Matys, whose last names were used ...
Ohio, USA - Trusted Seller
SICOTTE J 3 H-7 VERTICAL BORING MACHINE [BV-011224]
- Manufacturer: SICOTTE
SICOTTE - J 3H-7, ...Vertical Boring Machine 24" x 84" Table size. Equipped with: -- (5) 1.5 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindles with spring colle...
GIDDINGS & LEWIS 70-H6-UF
- Manufacturer: Giddings & Lewis
- Model: 70-H6-UF
X-Axis Travel: 576" Y-Axis Travel: 154" Z-Axis Travel: 48" Left Hand Mill: Table: 124" x 120" with 4th Axis Travel: 96" Rotary: 120" Capacity: 100 Ton Right Hand Mill: 2 Floor Plates: 240" x 120" Spindles: 50 Tap...
Fullerton, CA- Trusted Seller
2006 UNION KC 150
- Manufacturer: Union
- Model: KC 150
- Spindle bore: 150 mm
FLECKENSTEIN Werkzeugmaschinen GmbH contact: Mr. Fleckenstein
Kleinostheim, Germany 
1974 UNION BFT 90/2
- Manufacturer: Union
- Model: BFT 90
- Spindle bore: 90 mm
- Power requirement: 11 kW
separate switchboard, rapid feed, some tool holders
Monheim am Rhein, Germany
1973 Schiess BF 160 T 16 Heidenhain TNC 310 070107
- Manufacturer: Schiess Froriep
- Spindle bore: 160 mm
Totaly rebuilt 1999, Table extension & angle head, ATC via rack. X, Y, Z W are full CNC. B runs manually with separate display for position.
Värnamo, Sweden- Trusted Seller
1978 WOTAN RAPID 1 R/3
- Manufacturer: Wotan
- Model: RAPID 1 R3
- Spindle bore: 105 mm
CNC bench drilling machine, overhauled 2002, BOSCH Ctrl. CC 300 - This is a cross-bed machine consisting of a table assembly and column bed installed at a 90° angle angle, making it ideal for turning work and cir...
Metzingen, Germany 
1969 COLLET BFP 130 #1077-02744
- Manufacturer: COLLET
- Spindle bore: 150 mm
Panel field is optional and is charged separately The technical data are manufacturer or operator specifications and are therefore non-binding for us. We reserve the right to prior sale; only our terms and our te...
Dorsten, Germany- Trusted Seller
1985 SIP HAUSER(CH) MP - 53
- Manufacturer: Hauser
BOSCH strg. micro 8 - 3-axis CNC control make BOSCH MICRO 8 with screen, program input manually and via cassette and interface - digital display for Z - axis - separate switch cabinet, various tools oil cooler fo...
Metzingen, Germany