Used Bottling, Filling & Packaging in Oregon, USA

USed GAI Model 5031FM-Bier monoblock rinser/filler/capper - 2015

• used

• Manufacturer: Gai

Item is a used GAI model 5031 FM Bier automatic, monoblock, Rinser/Filler/Crowner. The machine has change parts for 12 oz., 22 oz., 500 ml., and 750 ml glass bottles and can apply a 26 mm crown. The rated capacit...

Pacific 6 head rotary piston filler

• used

• Manufacturer: Pacific

One available - Item is a used Pacific Rotary Piston Filler designed for hot fill products. This volumetric filling machine operates in a six-station rotary configuration with 11" valve spacing. It accommodat...

2010 Accutek AVF

• used

• Manufacturer: Accutek

Item is a used, Accutek, automatic, volumetric piston filler. This is a 4 head machine with piston fill capacity of 4 oz. to 32 oz. fills. It is equipped with 5/8 diameter, extended length nozzles to accommodate ...

Used "Whale Tail Depal"

• used

• Manufacturer: SKA

Item is a used Ska Depalletizer - Manula offload - oftem called a WHale Tail. This unit was designed with a twist and is specifically built to be elvated so that a full height pallet of cans can be offloaded and ...

Angelus 60L 6-Head Steam Flow Can Seamer

• used

• Manufacturer: Angelus
• Model: 60L

Pneumatic Scale Angelus 60L – 404 Dia Can Angelus 60L can seamer last running 404 dia cans. Features driven lower lifters and steam flow. Sold in As-is, Where-is condition.

Angelus 60L 6-Head Steam Flow Can Seamer

• used

• Manufacturer: Angelus
• Model: 60L

Pneumatic Scale Angelus 60L – set on 300 x 407 cans Angelus model 60L can seamer last running 300×407 cans. Note that change parts are incomplete. Features driven lower lifters, steam flow turret, single knife se...

Angelus 60L 6-Head Steam Flow Can Seamer

• used

• Manufacturer: Angelus
• Model: 60L

Pneumatic Scale Angelus 60L – 300×407 cans Angelus model 60L can seamer last running 300×407 cans (change parts are incomplete). Features driven lower lifters, steam flow turret, single knife separator, filler dr...

2012 ROTOCHOPPER Go-Bagger 250

• used

• Manufacturer: Rotochopper
• Model: GO-BAGGER 250

Excellent condition. Stored inside. Hours: 500 | Engine hours: 500 | Engine: 25HP Kubota

2006 ROTOCHOPPER Go-Bagger 250

• new

• Manufacturer: Rotochopper
• Model: GO-BAGGER 250

Resina Model S-30 Capper

• used

• Manufacturer: Resina

Pack West Model A120 "Torquer"

• used

• Manufacturer: Pack West

Item is a used, Pack West model A-120, fully automatic, cap torquer. The machine is designed to apply additional torque to caps having the threads previously engaged with the container, It is often utilized after...

Zalkin 6-head rotary Plastic Capper

• used

• Manufacturer: Zalkin
• Model: CA6

condition: Very Good Item is a used, Zalkin, 6 head, freestanding, rotary plastic capper. The machine operates from left to right (clockwise rotation). It is currently set up for 38 mm cap. It utilizes "pick and ...

McBrady Orbit Rinser

• used

Item is a used, McBrady, model 200,orbit rinser. The machine is equipped with a 54 inch diameter wheel and is currently set up for large mouth jars, including large round containers with 110MM closure.. It is equ...

Angelus 40P Seamer

• used

• Manufacturer: Angelus
• Model: 40P-MSLF

Angelus Model 40P-MSLF can seamer Angelus Model 40P 4-head can seamer with MSLF (Modified Straight Line Feed); s.n. 12911398. The unit is currently set for 211 steam flow (missing a few change parts); and include...

Pneumatic Scale Angelus 53P DF Seamer

• used

• Manufacturer: Angelus
• Model: 53P

Angelus 53P DF steam flow can seamer Angelus 53P steam flow seamer set to run a #10 can (603×700). The machine has double bearings on the bottom to hold the turret, a detachable handwheel, plus bolt-in lifter bus...