Building Filters
- Trusted Seller
2017 Biesse Viet Opera 5 (3) Head 53″ Wide Belt Sander With (3) Segmented Platens
- Manufacturer: Biesse
This 2017 Biesse Viet Opera 5-3.3 CKF 53″ wide calibrating sander has a total of 3,277 run (conveyor) hours. This is a very loaded, lower hour, very hard to find wide belt sander. This Opera does have a constant ...
- Trusted Seller
2016 Biesse Rover A 1432 Pod and Rail CNC Machining Center
- Manufacturer: Biesse
- Model: Rover
Working Capacity: "X axis 125.9" (3,200 mm), "Y" axis 52" (1,320 mm), "Z" axis stroke 13.7" (350 mm), max material thickness 9.6" (245 mm). Positioning speed:"X" 262 FPM (80 MPM), "Y" Axis 196 FPM (60 MPM), "Z"...
USA - Trusted Seller
2017 BIESSE / VIET OPERA 5-3CFK53 in. VENEER SANDER (3-HEAD 53") [SX-013116]
- Manufacturer: Biesse
BiIESSE - Viet Opera 5-3.3 CKF: 53″ Wide Calibrating Sander 53" Width cap; cross belt platen; platen head. Configuration 1st Head: Variable speed (0.2 - 16 ms); segmented platen; 6″ wide cross belt. ...
- Trusted Seller
2016 BIESSE ROVER A 1432 CNC MACHINING CENTER (W/ATC/BORING) [BP-012785]
- Manufacturer: Biesse
- Model: Rover
BIESSE ROVER A 1432 ATS CNC MACHINING CENTER (W/ATC/BORING): Specifications: -- Working Capacity: "X axis 125.9" (3,200 mm), "Y" axis 52" (1,320 mm), "Z" axis stroke 13.7" (350 mm), max material thickness 9.6" (2...
United States - Trusted Seller
2016 BIESSE ROVER K 1532 CNC MACHINING CENTER (W/ATC, "C" AXIS) [BP-012742]
- Manufacturer: Biesse
- Model: Rover
BIESSE ROVER K 1532 CNC MACHINING CENTER (W/ATC & "C" AXIS): -- Specifications: "BRIDGE GANTRY" machine with a working field in "X" axis 126" (3,200 mm), "Y" axis 61" (1,560 mm), max. material thickness 6" (165 m...
United States - Trusted Seller
2015 BIESSE AKRON 1330 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) [EO-012603]
- Manufacturer: Biesse
- Model: Akron
BIESSE AKRON 1330 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Computer controlled interface for workstations with servos and pneumatic positioning devices. Programmable selections for 1-touch ch...
- Trusted Seller
2014 BIESSE SKIPPER 100 CNC MACHINING CENTER (2-HEAD) [BP-012749]
- Manufacturer: Biesse
- Model: Skipper 100
BIESSE SKIPPER 100 2-Head CNC Machining Center, with Outfeed Table Specifications: -- Flexible "Top & Bottom" Machining Center that uses an innovative panel handling system. Working Capacity: -- "X" Axis 2,500 mm...
United States - Trusted Seller
2005 BIESSE LEVIA 330 WIDE BELT (40" - 49", 3-HEAD) [SX-012886]
- Manufacturer: Biesse
BIESSE - ARTECH LEVIA 330, ...3-Head Wide Belt Sander 43" Width cap. Drum, Drum, and Combination Head. Head Configuration: -- 1st Head: Rubber covered Contact Roll, 6" dia., 25 HP motor. -- 2nd Head: Steel Contac...
- Trusted Seller
2005 BIESSE Levia 110
- Manufacturer: Biesse
- Model: LEVIA 110
This BIESSE Levia 110 belt sander was manufactured in 2005. It features a maximum working width of 43 inches and belt capacity of 44" x 85". Equipped with a steel contact roller and a rubber roller, it ensures pr...
Czechia - Trusted Seller
2014 Biesse Akron 1330
- Manufacturer: Biesse
- Model: Akron
Biesse "Akron 1330" Edgebander (2014) Very Good Used Condition Edgebander Computer controlled interface for workstations with servos and pneumatic positioning devices. Programmable selections for 1-touch changeov...
2018 EDGEBANDER - BIESSE AKRON 1435A
- Manufacturer: Biesse
- Model: Akron
PART: 12527 - EDGE BANDING MACHINE - BIESSE AKRON 1435A USED - VERY GOOD CONDITION CAPABILITIES -One-sided edgebander with glue pot -CNC control and command system with TS10 digital controller, large ``touch scre...
Chihuahua, Mexico- Trusted Seller
Biesse Stream SB 2 10.5
- Manufacturer: Biesse
- Model: Stream
Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile ...
Sesto Calende, Italy - Trusted Seller
2017 Biesse Insider FTT R8
- Manufacturer: Biesse
- Model: Insider
Insider FTT R8 automatically adapts to the actual dimensions of the panel, guaranteeing maximum production efficiency: no machine downtime when changing the panel format, '0' retooling times, no manual interventi...
Italy - Trusted Seller
2016 Biesse Rover B 1650
- Manufacturer: Biesse
- Model: Rover
Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, t...
Sesto Calende, Italy 
2013 Biesse Akron 430
- Manufacturer: Biesse
- Model: Akron
600 volt integrated transformer Description : One-sided edgebander with glue pot CN control and command system with TS10 digital controller, 10`` touch screen LCD graphic display, WINDOWS CE operating system, USB...
Canada