Building Filters
AC 1500 Crown Drawworks
used
- Manufacturer: Crown
Surplus New AC 1500 Crown Drawworks Power & Engine: • Rated around 1500 HP – providing robust power for deep-well and directional drilling operations. Pullback & Line Pull: • Typically engineered to achieve pullb...
The Woodlands, TX- Trusted Seller
2007 Crown CE 600 Well Service Rig
used
- Manufacturer: Crown
2007 CROWN CE 600 WELL SERVICE RIG 2023 CAT IV INSPECTION DETROIT 60 SERIES 14L DIESEL ENGINE ALLISON 5860 DB TRANSMISSION 104'-225# MAST 6- SHEAVE CROWN, ROD BASKET & TUBING BOARD. ROD TRANSFER CYL., ADJUS...
$515,000 USDWest, TX - Trusted Seller
Crown 2/1000
used
- Manufacturer: Crown
- Distance between Centers: 42"
18"/26" x 42" crown 2/1000, Used #A3070 Capacity: 18"/26" x 42" | Swing over bed: 18" | Distance between centers: 42" | Swing in gap: 26" | Hole thru spindle: 2" | Feeds: .0024 to .1395 | Inch threads: 2 - 112 ...
- Trusted Seller
2007 CROWN CE600DD 5-AXLE WELL SERVICE RIG (2023 Cat IV Inspection)
used
- Manufacturer: Crown
- Hours: 649
P/B: DETROIT 60 SERIES 14L DIESEL ENGINE, ALLISON 5860 DB TRANS, 104'-225# MAST, 6- SHEAVE CROWN, ROD BASKET & TUBING BOARD. ROD TRANSFER CYL., ADJUSTABLE HEIGT WORK FLOOR & OPERATOR PLATFORM, HYD. TONG LIFT CYL....
Midland, TX 7/8" CROWN UNLIMITED #STCOS-M10 SINGLE TUBE STRAIGHTEN & CUT MACHINE: STOCK #66197
used
- Manufacturer: Crown
- Capacity: 7/8" MAX
EQUIPPED WITH: INDEX-ABLE 2 PLANE STRAIGHTENER DOUBLE HITCH FEED TENSION DEVICE ALLEN BRADLEY 550 TOUCH SCREEN CONTROL
Holland, OH
Crown Busbar Taping Machine
used
- Manufacturer: Crown
Operation mode: touch screen | Winding method: spiral winding | Applicable wire diameter: Ф15mm-40mm | Tape width: 9-30mm | Wrapping length: unlimited | Tape density: adjust by setting parameters | Tape outer di...
Suzhou, China
Crown Busbar Taping Machine
used
- Manufacturer: Crown
Taping method: Spot taping plus short distance continuous taping | Working environment: 0~40℃(ambient temperature) | Applicable air pressure: 0.4 MPa - 0.6 MPa | Power supply: two-phase, AC220V, 50HZ | Power: 40...
Suzhou, China
Crown Laser Marking Machine
used
- Manufacturer: Crown
Working voltage: AC220V±10% 50/60HZ European standard power cord | Supported formats: DXF/AI/PLT/DST/SVG/GBR/BOT/BMP/JPG/GIF/PNG | System environment: XP/WIN7/WIN8/WIN10 | Laser type: UV ultraviolet laser | Repe...
Suzhou, China
Crown Active Wire Prefeeder Machine
used
- Manufacturer: Crown
Driving method: Three-phase motor + reducer | Rated rotational speed: 1450 | Maximum rotational speed: 2200 | Outer diameter of reel: 400 - 1000 | Through - hole diameter: No Limit | Height (width) of reel: With...
Suzhou, China
Crown Cable Spot Taping Machine
used
- Manufacturer: Crown
Wrapping product length: workpiece ≥170mm | Applicable maximum copper bar: W25mm*H3mm | Applicable wire diameter: 8-25MM Note: 4-8mm depends on the product | Applicable tape width: ≤25mm | Applicable tape: flann...
Suzhou, China
Crown Wire and Tube Taping Machine
used
- Manufacturer: Crown
Power supply: 100-240V 50-60HZ | Harness diameter: 5-35mm | Winding speed: 150-500 rpm | Tape specifications: Width: 5-25mm Outer diameter: ≤110mm Inner hole: 25mm (1in), 32mm (1.25in), 38mm (1.5in) ...
Suzhou, China
Crown Handheld Tape Winding Machine
used
- Manufacturer: Crown
Power supply: 100 - 240V 50 - 60HZ | Tape specifications: Width 10 - 25MM; Outer diameter less than 110MM | Inner diameter specification: Standard 25/32/38; Other specifications can be customized | Weight: Appro...
Suzhou, China
Crown Handheld Tape Wrapping Machine
used
- Manufacturer: Crown
Tape width: 10-20mm | Taping diameter: 8-35mm | Max. tape od: 90mm | Speed: Manually controlled | Power: 220/110(V) | Weight: 8.5kg | Dimension: 43*41*20cm
Suzhou, China
Crown Active Cable Feeder Machine
used
- Manufacturer: Crown
Drive mode: Three-phase motor + reducer | Rated speed: 1450 | Maximum speed: 2200 | Outer diameter of wire drum: 100-650mm | Through hole diameter: 38-200mm | Reel height: 650mm | Installation: Installation of i...
Suzhou, China
Crown Active Cable Feeder Machine
used
- Manufacturer: Crown
Applicable: Axis-mounted wire | Maximum load: 1500Kg | Drum outer diameter: 800-1500mm | Through hole diameter (drum inner diameter): 53-110mm | Drum height (drum width): 900mm | Motor power: 3KW | Drive mode: T...
Suzhou, China
