Building Filters
- Trusted Seller
2008 Brandt O KDN 530C
- Manufacturer: Brandt
- Model: KDN530
Used Brandt Edgebander Located in Ohio Information displayed has been gathered from machine owner, internet searches and other sources. Information is believed to be correct, but not guaranteed. All buyers should...
- Trusted Seller
Brandt Trimmer - Optimat F13
- Manufacturer: Brandt
- Model: Optimat F13
W/ Foot Switch, 0.44 Kw, 3450 Rpm, Made In Germany
$304 USDEuclid, OH - Trusted Seller
Brandt Ambition 1440 Optimat KDF 440 AT Edgebander w/ airTec! Stock #25955
- Manufacturer: Brandt
Brandt Model Optimat 1440 KDF 440 AT Edgebander Includes "AirTec" Hot-Air Edgebanding Capabilities Two-Motor Pre-Milling Unit (Counter-Rotating) Three-Roll Pressure Section w/ Pneumatic Guillotine Two-Motor End-T...
Hughesville, PA - Trusted Seller
Brandt Optimat KTD 720 Edge Bander
- Manufacturer: Brandt
- Model: OPTIMAT KTD 720
Brandt Optimat KTD 720 Edge Bander Model: Optimat KTD 720 - Edge Thickness: 0.02" – 0.12" (0.5 mm – 3.0 mm) - Edge Height (Width): 0.4" – 2.36" (10 mm – 60 mm) - Workpiece Thickness: 0.39" – 2.17" (10 mm – 55 m...
Detroit, MI - Trusted Seller
Brandt KDN540 2C Edge Bander
- Manufacturer: Brandt
Brandt Edge Bander - Model: KDN540 2C - Serial Number: 0-261-02-9794 - Year of Manufacture: 2005 - With Brandt Push-Button Controls - With Veneer Rolls
- Trusted Seller
2002 Brandt KD 76F Edgebander
- Manufacturer: Brandt
- Model: KD76
Brandt KF 76F Edgebander: Pre-milling, top/bottom trim, buffing, extra glue pot
USA - Trusted Seller
USA 
Brandt KDN450-2C Edgebander, 2005, Just taken out of service
- Manufacturer: Brandt
Brandt KDN450-2C Edgebander, 2005, Just taken out of service
$4,500 USDSheboygan, WI- Trusted Seller
BRANDT KTD-65 EDGE-BANDER
- Manufacturer: Brandt
BRANDT KTD-65 EDGE-BANDER S/N: 0-260-01-4260, S-5219 Standard Specifications: *Additional specifications and photos available upon request*
Hickory, NC - Trusted Seller
2007 Brandt 520 Single Sided Edgebander KDN
- Manufacturer: Brandt
- Model: KDN
Edge band thickness 0.4 – 8mm (0.016" - 1/4” ) Coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (PVC) Edgeband height 12 - 65 mm (1/2" – 2 9/16 ") Panel length min. 160 mm (6 3/8") Panel width min. 65 mm (2 3/8")...
USA 
Brandt Contour Edgebander KTD 72, 2003, 230V, 3PH
- Manufacturer: Brandt
- Model: KTD72
Brandt Contour Edgebander KTD 72, 2003, 230V, 3PH To be cleaned and checked Just removed from a local manufacturing facility shutting down or changing production processes.
$4,995 USDSheboygan, WI
2012 Brandt KDF 1660 Edgebander
- Manufacturer: Brandt
Technical data RETURN CONVEYOR NOT INCLUDED Exact specs can be verified after inquiry. Technical data RETURN CONVEYOR NOT INCLUDED Exact specs can be verified after inquiry.
Brandt KD54B Compact 2mm Cap. Edgebander W/Buffing, 2000, 230V, 3PH, Refurbished
- Manufacturer: Brandt
Brandt KD54B Compact 2mm Cap. Edgebander W/Buffing, 2000, 230V, 3PH, Cleaned, Checked Cleaned and checked, repaired Proximity Switch replaced, several airlines replaced, electrical cording tidied up, other repa...
$4,995 USDSheboygan, WI- Trusted SellerAuction
2000 Brandt Optimat KTD72 contour edge bander, 230V, 3 phase, foot pedal control, work piece thi...
- Manufacturer: Brandt
- Model: KTD72
(1) 2000 Brandt Optimat KTD72 contour edge bander, 230V, 3 phase, foot pedal control, work piece thickness capacity is 3/8" to 2 5/32", edge thickness capacity is .5 to 1.0mm, includes custom built side table, wi...
Zeeland, MIVisit Auction Website Brandt Contour Edgebander Model KDT820
- Manufacturer: Brandt
DEMO VIDEO FROM HOMAG Motor power approx. 3 kW approx. Weight approx. 1,300LBS. Working height 36” (40” with Vacuum cup) Outer dimensions Width 50” Depth 72” Height 120” Suction nozzle - Workpiece thickness 1/2” ...
Brandt KDN530 Edgebander
- Manufacturer: Brandt
- Model: KDN530
Good condition Brandt KDN530 Edgebanders available between 2007 and 2008 years. Located in USA and other countries. Click request price for more information.
USA
