Model

Country

  • 1995 Bridgeport Ez Path

    $19,500 - South El Monte, CA
    • Manufacturer: Bridgeport
    • Model: EZ PATH
    • Distance between Centers: 40"
    • Spindle Nose: A2 - 5

    coolant system serial: 002-079654-325 | weight: 4,000 lbs. | voltage: 480v ~ 3 phase | capacity: 16.5" x 40" | bed width: 12" | bed height: 13-5/32" | horsepower: 8 h.p. | spindle nose: a2 - 5 | sp...

  • 2003 Bridgeport Romi M-20 CNC Turning Center

    No price - Barrington, IL Recently Added
    • Manufacturer: Bridgeport
    • Spindle Bore: 2.56"
    • Spindle Nose: A2-5

    equipped with: fanuc 21it control chuck tailstock rpm: 3000 rpm | horsepower: 15 hp | max. swing: 20.4" | spindle bore: 2.56" | spindle nose: a2-5 | z-axis travel: 60" | condition info: good | mach...

  • EZ-Path II Bridgeport Romi EZ-PATH II CNC Lathe 20" x 40"

    $18,000 - Minneapolis, MN
    • Manufacturer: Bridgeport

    model ez-path ii, s# 016001665349, date mfg. 12/26/95, 20" swing, 40" between centers, variable speed spindle from 4 to 3,500 rpm, 2" thru hole, 9" 4 jaw set-tru chuck, ez path ...

  • EZ-Path Bridgeport Romi EZ-PATH CNC Lathe 17" x 40"

    $14,000 - Minneapolis, MN
    • Manufacturer: Bridgeport

    model ez-path, s# 002-82037-325, date mfg. 03/14/97, 17" swing, 40" between centers, 24 spindle speeds from 37.5 to 3,000 rpm, 8" adjust tru 3 jaw chuck, ez path programmable dro, sliding...

  • 2000 Bridgeport EZ Path SD Romi –

    No price - Chicago, IL
    • Manufacturer: Bridgeport
    • Distance between Centers: 40″

    8" adjustable chuck, tool holders quill: 4.7″ | x-axis: 295 in/min | z-axis: 384 in/min | control: bridgeport dx32r | low range: 25-1,000 rpm | feed rates: 0.01-200 in/min | high range: 100-4,000 r...

  • 1998 Bridgeport EZ PATH-S Romi

    No price - Chicago, IL
    • Manufacturer: Bridgeport

    control: bridgeport ez path | spinlde nose: a2-5″ | center height: 8.46″ | spindle drive: 7.5 hp | spindle speed: 26- 4,000.00 rpm | swing over ways: 17″ | max center distance: 40″ | hole through ...

  • 1997 BRIDGEPORT EZ PATH

    $17,250 - Santa Ana, CA
    • Manufacturer: Bridgeport
    • Model: EZ PATH

    this machine is in very good condition and is available to be seen under power. it was traded in on a new machine.

  • EZ-Path II Bridgeport Romi EZ-PATH II CNC Lathe

    $22,000 - Minneapolis, MN
    • Manufacturer: Bridgeport

    model ez-path ii, s# 002-082770-349, date mfg. 10/31/97, 240v 3ph 60hz, more info coming soon

  • 1971 Bridgeport Series II-4HP Vertical Mill, New 1971

    No price - Elk River, MN
    • Manufacturer: Bridgeport

    equipped with: power feed on x & y-axes power knee 6" riser

  • BRIDGEPORT "EZ PATH" CNC LATHE

    No price - Warren, MI
    • Manufacturer: Bridgeport