Machine Tools » Bending & Forming » Greece

Building Filters

126

Used Bending & Forming in Greece

  • Trusted Seller
    2004 MEP SpA Syntax Line

    2004 MEP SpA Syntax Line 25

    • Manufacturer: MEP
    • Model: Syntax Line 25

    The Machine is Fully Fledged. It comes with an 8 slot mobile rebar storage area, machine main body with Automatic Feeding & Alignment System (Magnetic Grip), double bending unit (MEP patented), 12m run-off and 12...

    Oraiokastro, Greece
  • Trusted Seller
    2005 Pedax GmbH Combiline G

    2005 Pedax GmbH Combiline G + Permatic

    • Manufacturer: Pedax GmbH

    The Center consists of: 1. Combiline in turn consisting of a. Mobile rebar storage area 18m, 5 slots, b. Shear unit, with control console, and 14m run-off kicking off: i. To the right on a roller covneyo...

    Oraiokastro, Greece
  • Trusted Seller
    2011 MEP SpA Planet 16

    2011 MEP SpA Planet 16 Plus

    • Manufacturer: MEP
    • Model: Planet 16

    The machine is FULLY FLEDGED, as it consists of 6 motorised-synchronised pay-offs, pulling winch, fully automatic diameter change over, 12m run-off, 12m mobile storage trolley, safety beams, full set of accessori...

    Oraiokastro, Greece
  • Trusted Seller
    2007 SCHNELL SpA Formula 14

    2007 SCHNELL SpA Formula 14 Sapiens

    • Manufacturer: Schnell

    Automatic Stirrup Bender with a Set of Four Pay-Offs, Four Coil Holders, Automatic Pulling Winch, Automatic Diameter Change, Industrial PC model “KS 104”, Control Console with Joy-Stick for the control of the las...

    Oraiokastro, Greece
  • Trusted Seller
    2007 Schnell SpA Nextra 16

    2007 Schnell SpA Nextra 16

    • Manufacturer: Schnell
    • Model: NEXTRA 16

    Automatic Stirrup Bender, with a 12m Collection Bench, set of two Pay-offs and two Coil Holders, staightening units especially designed to straighten bad coils, final adjusting rollers controlled by means of joy-...

    Oraiokastro, Greece
  • Trusted Seller
    2011 MEP SpA CAL160

    2011 MEP SpA CAL160

    • Manufacturer: MEP

    This is MEP’s most powerful radius bender, able to process bars up to 60mm. The machine has worked only for a couple of projects. Once cleaned it will be LIKE NEW Excellent. Fully Operative The machine will be de...

    Oraiokastro, Greece
  • Trusted Seller
    2009 Schnell San Marino Srl

    2009 Schnell San Marino Srl Formula 14 Sapiens

    • Manufacturer: Schnell

    The Machine comes with three breaked pay-offs, semi-automatic diameter change, all spare parts (for each diameter), and manuals. It is in Excellent Condition, Fully Operative. In fact the machine is still produci...

    Oraiokastro, Greece
  • Trusted Seller
    2001 MEP SpA MiniSyntax

    2001 MEP SpA MiniSyntax

    • Manufacturer: MEP
    • Model: Mini Syntax

    The Machine has been REFURBSIHED. It is in EXCELLENT condition, FULLY OPERATIVE. It comes with seven (7) breaked pay-offs, auto-diameter change, pulling winch, all pins and mandrels (for each diameter), 12m run-o...

    Oraiokastro, Greece
  • Trusted Seller
    2007 Stema-Pedax Twinmaster 12S

    2007 Stema-Pedax Twinmaster 12S

    • Manufacturer: Stema

    Automatic Stirrup Bender that processes double strand Φ5mm to Φ10mm and signle strand Φ5mm to Φ12mm. The machine comes with two pay-offs and coil holders, spare parts, and manuals. The machine has been cleaned an...

    Oraiokastro, Greece
  • Trusted Seller
    2016 MEP SpA Mini Syntax

    2016 MEP SpA Mini Syntax 16 HS

    • Manufacturer: MEP
    • Model: Mini Syntax 16

    The machine is FULLY FLEDGED, as it consists of 6 motorised-synchronised pay-offs, pulling winch, fully automatic diameter change over, 12m run-off, full set of accessories (for Φ8mm to Φ16mm) and original manual...

    Oraiokastro, Greece
  • Trusted Seller
    2013 Schnell SpA Formula 14

    2013 Schnell SpA Formula 14 EVO

    • Manufacturer: Schnell

    The machine comes with 4 pay-offs, 6m bench, all accessories for Φ8 to Φ14mm, and original manuals. The machine has been kept, maintained and serviced very well. Very Good, Fully Operative Subject to agreement, t...

    Oraiokastro, Greece
  • Trusted Seller
    2005 Schnell SpA Formula 12HS

    2005 Schnell SpA Formula 12HS

    • Manufacturer: Schnell

    The machine comes with 2 pay-offs, 6m bench, all accessories, and original manuals. It has been Fully Refurbished, and brand new set of rollers have been applied EXCELLENT, FULLY REFURBISHED, FULLY OPERATIVE All ...

    Oraiokastro, Greece
  • Trusted Seller
    2016 Schnell SpA Prima 13

    2016 Schnell SpA Prima 13

    • Manufacturer: Schnell
    • Model: PRIMA 13

    The machine comes with 2 pay-offs, and 6m bench. Pulling rollers (x2), measuring roller (x1), pressure roller (x1), and pulling rollers servomotor are new. Full set of accessories (pins, mandrels, wire guides, bl...

    Oraiokastro, Greece
  • Trusted Seller
    2006 MEP SpA Format S

    2006 MEP SpA Format S

    • Manufacturer: MEP
    • Model: Format S

    Automatic Stirrup Bender consisting of two pay-offs and two coil holders, hydraulic pulling, straightening and shaping unit, control console with industrial PC Good Mini Chorus Software, Bar Code Scanner The mach...

    Oraiokastro, Greece
  • Trusted Seller
    1998 MEP SpA Mini Syntax

    1998 MEP SpA Mini Syntax

    • Manufacturer: MEP
    • Model: Mini Syntax

    Despite its age the machine is in VERY GOOD condition. It comes with four pay-offs, four coil holders, a 12m collection rack, and full set of spare parts. One of the first models equiped with fully automatic stra...

    Oraiokastro, Greece
  • no-image_en.png

    MEP Concept 91 Bending & Forming

    • Manufacturer: MEP
    • Model: Concept 91

    Good condition MEP Concept 91 Bending & Formings manufactured in 1993. Located in Greece and other countries. Click request price for more information.

    Greece
34567

Overview

Bending and forming equipment is essential for shaping metal and other materials into desired forms. These machines are commonly used in industries like construction, automotive, and manufacturing to create precise bends, curves, and angles. Typical equipment includes press brakes, tube benders, and roll forming machines, which offer high accuracy and efficiency for various applications.

FAQ

What factors should I consider when buying bending and forming equipment?

Consider the material type and thickness you will be working with, the required bend angles and precision, machine capacity, and any additional features like CNC control or automation.

How can I ensure safe shipping for my bending and forming machine?

Use a specialized transport service for heavy machinery. Ensure the equipment is well-secured, properly crated, and protected from environmental factors during transit.

What maintenance is required for bending and forming machines?

Regular maintenance includes lubrication of moving parts, inspection and replacement of worn-out components, calibration checks, and keeping the machine clean and free from debris. Refer to the manufacturer's manual for specific guidelines.