Used Bullard in Texas, USA

BULLARD 50

• Manufacturer: Bullard
• Model: 50

BULLARD Cutmaster

• Manufacturer: Bullard
• Model: Cut Master

BULLARD Cutmaster 54

• Manufacturer: Bullard
• Model: Cutmaster 54

*All specs are subject to buyer review

1943 BULLARD 54 SPIRAL DRIVE

• Manufacturer: Bullard
• Model: Spiral Drive
• Spindle bore: 88.9 mm

54" Used Bullard Vertical Turret Lathe Table Size 50" 4 Jaw Swing Side Head Above Table 56" Swing Side Head Below Table 58" Height Under Rail 39" Table Speed 3.5 To 60 Rpm's Feeds .002 To .500 I.P.R. Turret Head ...

1972 BULLARD 124" DYN-AU-TAPE

• Manufacturer: Bullard
• Model: Dyn-Au-Tape

Fanuc 15TT CNC Control Faceplate Jaws 3” Diameter Ball Screws Features: Power Rail Clamping 4 Position Turret index on Ram Head 75 HP DC Motor Brief Scope of Work: Rebuild Main table drive motor and install new D...

54" Used Bullard Spiral Drive Vertical Turret Lathe Model 54

• Manufacturer: Bullard
• Model: Spiral Drive
• Spindle bore: 88.9 mm

Estimated time needed for reconditioning is six to eight weeks.

36" Bullard Cutmaster Vertical Turret Lathe

• Manufacturer: Bullard
• Model: Cut Master

42" Used Bullard (Cut Master) Vertical Turret Lathe Model 42 Floor Shift

• Manufacturer: Bullard
• Model: Cut Master

Machine Has Been Cleaned, Painted And Cycled. 1. Turret Slide & Swivel in our facility. Dismantle unit as required. Clean all component parts. 2. Remachine all bearing surfaces of the Turret Slide to remove local...

42" Used Bullard Spiral Drive Vertical Turret Lathe Model 42 Year

• Manufacturer: Bullard
• Model: 42

Machine Will Be Cleaned, Painted And Cycled. Machine Will Be Updated To A New Electric Rapids And Elevation System.

42" Used Bullard Spiral Drive Vertical Turret Lathe

• Manufacturer: Bullard
• Model: 42

64" Used Bullard (Cut Master) Vertical Turret Lathe Model 64 Flush Floor

• Manufacturer: Bullard
• Model: Cutmaster 64

1. Turret Slide & Swivel in our facility. Dismantle unit as required. Clean all component parts. 2. Re-machine all bearing surfaces of the Turret Slide to remove localized wear. 3. Re-machine all bearing surfaces...

42" Used Bullard Hi-Column Spiral Drive Vertical Turret Lathe Model 42 ...

• Manufacturer: Bullard
• Model: 42

Reconditioning will take 6 to 8 weeks after receipt of Purchase Order. Photos are for reference only. That machine has been sold.

74" Bullard Cutmaster Vertical Boring Mill With Floor Shift

• Manufacturer: Bullard
• Model: Cutmaster 74

1955 BULLARD 36" CUT MASTER

• Manufacturer: Bullard
• Model: Cut Master

Machine Will Be Cleaned, Painted And Cycled. All Feed And Rapid Shafts Seals Will Be Replaced. Hand Wheel Seals Will Be Replaced, Gear Boxes Will Be Cleaned And Checked. Hydraulics And Main Motor Have Been Recon...

36" Used Bullard (Cut Master ) Vertical Turret Lathe Model 36

• Manufacturer: Bullard
• Model: Cut Master

Note: Machine Will Be Cleaned, Painted And Cycled. All Feed And Rapid Shafts Seals Will bBe Replaced. Hand Wheel Seals Will Be Replaced, Gear BoxesWill Be Cleaned And Checked. Main Shifting Solenoid Block Recondi...