
Burkert Type 0304 - Direct-acting 3/2-way plunger valve
- Manufacturer: Bürkert
Vibration-resistant block-screwed coil design Small compact design, process connections on one level Housing made of brass and stainless steel with Bürkert flange SFB
Huntersville, NC
Burkert Type 6228 - Diaphragm valve 2/2-way servo-assisted
- Manufacturer: Bürkert
The Type 6228 is a servo-assisted 2/2-way solenoid valve with servo-diaphragm. It is particularly suited for neutral media. Without electrical power, this solenoid valve is closed. Pressure builds up through the ...
Huntersville, NC
Burkert Type 6407 - Servo-assisted 2/2-way piston valve
- Manufacturer: Bürkert
The Type 6407 valve is a servo-assisted piston valve. The fix coupling between pilot valve and piston provides an opening of the valve without pressure difference. As a piston valve, the Type 6407 is particular s...
Huntersville, NC
Burkert Type 6212 - Diaphragm valve, 2/2-way, servo-assisted
- Manufacturer: Bürkert
Type 6212 is a pilot-operated 2/2-way solenoid valve with servo diaphragm. The actuator is separated from the medium by a separating diaphragm. This allows use with slightly aggressive media. The housing program ...
Huntersville, NC
Burkert Type 5282 - Servo-assisted 2/2-way diaphragm valve
- Manufacturer: Bürkert
The 5282 valve is a servo-assisted diaphragm valve. A minimum differential pressure is required for the valve to function. Various diaphragm material combinations and circuit functions are available depending on ...
Huntersville, NC
Burkert Type 6430 - Piston valve, 3/2-way, servo-assisted
- Manufacturer: Bürkert
The valve 6430 is a servo-assisted 3/2-way piston valve. If the valve is not supplied with auxiliary pilot air, a minimum differential pressure is required for the function. Variants: - For neutral liquids and ga...
Huntersville, NC
Burkert Type 6440 - Servo-assisted 2/2-way piston valve
- Manufacturer: Bürkert
The valve 6440 is a servo-assisted piston valve. The stopper and the core guide tube are welded together to increase pressure resistance and leak-tightness. The coils are moulded with highly chemically resistant ...
Huntersville, NC
Burkert Type 0355 - Plunger valve 3/2-way direct-acting
- Manufacturer: Bürkert
Direct-acting plunger solenoid valve Type 0355 for controlling hot media such as steams, oils and gases. 3/2 way seat valve direct-acting Push-over coil system Medium temperature up to +180 °C For liquid and gase...
Huntersville, NC
Burkert Type 6240 - Servo-assisted 2/2-way piston valve
- Manufacturer: Bürkert
The 6240 valve is a servo-assisted piston valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depend...
Huntersville, NC
Burkert Type BBS-10 - Check valves with welded connections
- Manufacturer: Bürkert
These sterile check valves with welded connection are suitable for liquids. The eccentric design and the specially designed internal geometry enable nearly complete draining in a horizontal installation position....
Huntersville, NC
Burkert Type 0200 - Direct-acting 2/2-way plunger valve
- Manufacturer: Bürkert
Type 200 is a direct-acting plunger type solenoid valve normally closedby spring action (circuit function A). A diaphragm isolates the fluid from the solenoid system. When energized, the solenoid armature is draw...
Huntersville, NC
Burkert Type 0303 - Direct-acting 3/2-way plunger valve
- Manufacturer: Bürkert
Vibration-resistant block-screwed coil design Small compact design, process connections on one level Housing made of brass and stainless steel with threaded connection
Huntersville, NC
Burkert Type 0400 - Piston valve 2/2-way servo-assisted
- Manufacturer: Bürkert
Vibration-resistant coil design, operating principle NO (release outwards) Compact design, up to DN 12/16 bar Body in brass
Huntersville, NC
Burkert Type SET6 - Valve & control cone sets
- Manufacturer: Bürkert
Huntersville, NC
Burkert Type 0142 - Diaphragm valve, 2/2-way, servo-assisted
- Manufacturer: Bürkert
The 0142 valve is a servo-assisted diaphragm valve. A minimum differential pressure of 0.5 bar is required to open and close the valve. Various diaphragm materials and circuit functions are available depending o...
Huntersville, NC

