Used Dump Trailers in Mecklenburg-Vorpommern, Germany

2026 Krampe HP 20 Carrier

• Manufacturer: Krampe
• Model: HP 20 CARRIER

Loading volume: 12,1 m³ | Tyre equipment: 650/65R26.5 | Number of axles: 2

2026 Meiller Stahlmulde MHKS 41/3-S, Schütte, Liftachse

• Manufacturer: Meiller
• Model: MHKS41/3

ABS EBS air suspension According to our "General and designed terms of business" without any warranty can we today offer you a non-binding vehicle until the conclusion, error, typographical mistake & intermediate...

Oehler OL ZDK 180 U Dreiseitenkipper

• Manufacturer: Oehler

Compressed air brake system: Yes | Tyre equipment: 560/ 45 R22.5 | Construction type: three-side | Place-upon attachments: Steel | Tarpaulin: Yes | Number of axles: 2

Conow tilting bridge with wide-wall superstructure 80 cm high, variant 2.1

• Manufacturer: Conow

Floor panel 4 mm thick Profiled laser-welded drop sides Front and rear wall and right-hand side are firmly welded to the tipper body Left-hand full-length pendulum dropside with full-length central locking, opera...

Conow tipper bridge with body 95 / 90 cm high

• Manufacturer: Conow

- left side tiltable (on request tiltable to the right side) - left sides with longitudinally divided profiled laser-welded drop sides, - left side is equipped with upper pendulum drop side and lower drop side - ...

Conow tipper bridge with combined body 95 / 90 cm high

• Manufacturer: Conow

- left side tiltable (on request tiltable to the right side) - right side with continuous side wall firmly welded - the left side with two longitudinally divided drop sides reinforced by 3 vertical - by 3 vertica...

Conow HW 60 V2.5

• Manufacturer: Conow

- Tilting bridge with wide wall structure 95 cm high - tiltable on both sides with two center stanchions - front and rear walls are firmly welded to the tipper body - both sides with pendulum tailboards, center s...

Conow HW 80 V4

• Manufacturer: Conow

Tipping bridge with multi-purpose superstructure V4 - tipper bridge with wide wall body 120 cm high - left side tiltable (or right side tiltable on request) - left side with two pendulum drop sides, middle stanch...

Conow HW 80 V4.1

• Manufacturer: Conow

Tipping bridge with combined superstructure V4.1 - Tipping bridge with combined superstructure 120 cm high - tiltable to the left (tiltable to the right on request) - end wall and rear wall are continuous drop si...

Conow HW 60 V1 standard version

• Manufacturer: Conow

This design is the conventional superstructure as we have known it for years with the trailers HW 80 and HW 60. This body is characterized by its versatility, whether for loading grain to transporting manure or b...

Conow HW 80 V4.2.3

• Manufacturer: Conow

- Tipping bridge with combined superstructure suitable for transporting chaff and grain - body 120 cm high with 40 cm extension - tiltable to the left (on request also tiltable to the right) - profiled laser-weld...

Conow HW 60 V3.2

• Manufacturer: Conow

- Tipping bridge with combined superstructure 95 cm high - front, rear and one side wall are each continuous drop sides and are firmly welded to the tipping body - the other side wall can be opened completely via...

Conow

• Manufacturer: Conow

Conow HW 80 V3.2

• Manufacturer: Conow

Tipping bridge with combined superstructure 95 cm high - tiltable to the left (tiltable to the right on request) - front, rear and one side wall are continuous drop sides and firmly welded to the tipping body - t...

Conow HW 80 V1

• Manufacturer: Conow

- Tipping bridge with superstructure - tiltable on both sides - 2 x front/rear wall below - 2 x front/rear wall above - left and right side walls divided lengthwise - upper drop side is pendulum mounted - the low...