VOGEL & SCHEMMANN MISCHKA II
- Manufacturer: Vogel
Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 5.5 kW, connected loads 400 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...
Meinerzhagen, Germany2000 LAEMPE core-producing center LLKFZ 10
- Manufacturer: Laempe / Röperwerk
casting volume 10 l, core box max. 700x 350/695 x 480 mm, vacuum clamping device, filling funnel, enclosure, PLC control with LAEMPE operator guidance, gassing device, sand mixer SM7 1.5, binder dosing, steel fra...
Meinerzhagen, GermanyVOGEL & SCHEMMANN MISCHKA I GF/70 "A"
- Manufacturer: Vogel
Batch max. 50-75 kg, container Ø 530 x 400 mm, capacity max. 1 t/h, drive power 2.2 kW, connected load 380 V, 50 Hz, hand lever door lock, control with emergency stop push button, tilting lid with position limit ...
Meinerzhagen, Germany1986 STEFFENS DUO-MIX 1
- Manufacturer: STEFFENS
Batch max. 80 l/120 kg, container Ø 600 mm, dual mixing principle: side and bottom mixing arms, capacity 2-3 t/h, drive power 4 kW, connected load 380 V, 50 Hz, pneumatic closure, safety limit switch, control wit...
Meinerzhagen, Germany
1978 VOGEL & SCHEMMANN KSM 6.10.02
- Manufacturer: Vogel
Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit
Meinerzhagen, Germany1989 RÖPER / LAEMPE LKV H 5
- Manufacturer: Laempe / Röperwerk
Single-column machine, shooting volume 5 l, horizontal/vertical core box division, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-han...
Meinerzhagen, Germany
1988 LAEMPE core shooting machine L-5
- Manufacturer: Laempe / Röperwerk
Shooting volume 5 l, horizontal and/or vertical core box division, vacuum clamping and separating device, hydraulic unit, safety cabin, sand hopper, electric control B+R
Meinerzhagen, Germany
2013 SEGAB PROMIX 2x 200
- Manufacturer: Segab
Divided daily silo (new sand/regenerate), capacity approx. 7 m³, dedusting filter, 2 sand heater sifters, sand dosing, 2 batch mixers á 200 kg, Pep Set component dosing, steel support structure, electric PLC cont...
Meinerzhagen, Germany
2014 Eirich FS5
- Manufacturer: Eirich
as a superstructure spinner to be arranged on a flat belt conveyor, belt width 800 mm The sand on the belt conveyor passes through the working area of the rotor. The passing sand is intensively processed and loos...
Frankfurt, Germany
Eirich FS8
- Manufacturer: Eirich
- As a superstructure slinger to be arranged on a flat belt conveyor, belt width 1200mm - for loosening of finished sand - recommended belt speed: 1,05 m/s - rotation monitoring of the rotor tool - subject to pri...
Frankfurt, Germany- Trusted Seller
2018 Core sand mixing plant Core sand mixing plant
- Manufacturer: Core sand mixing plant
Electrically heated bogie hearth furnace Electrically heated bogie hearth furnace Electrically heated bogie hearth furnace Dimension Range Internal Width 1.5 to 5.0 meters Internal Depth 2.0 to 8.0 meters (bo...
Germany - Trusted Seller
Riesa, Germany 
Normag expansion bellows compensator of type PF nominal diameter DN 80
- Manufacturer: Normag
This Bellows compensator of type PF with a Nominal diameter DN 80 is a high-quality and robust piping compensator for industrial use. The media-contacting parts are made of PTFE (virgin) with Fiberglass reinforce...
Grenzach-Wyhlen, Germany- Trusted Seller
Cast iron clamping plate - Type 1060/2280 5564
- Manufacturer: Guss
Clamping plate, welding table, welding table, straightening plate, perforated plate -with supporting ribs -casting plate
Wiefelstede, Germany - Trusted Seller
Chuck flange of cast iron - Ø 193 mm 26027
- Manufacturer: Guss
Chuck flange, flange mounting, lathe chuck flange, driving flange
Wiefelstede, Germany
Tip: Enter manufacturer, model or keyword
