Used Machine Tools in Hesse, Germany

2003 HELLER MCT160 1113-6651

• Manufacturer: Heller
• Model: MCT160

Double-spindle 4-axis horizontal machining center 4 machine plates Renishaw measuring probe Control Siemens Sinumerik 840D Working area (X/Y/Z) : 450x450x450 mm Max. pallet/table load: 300 kg Acceleration: 10 m/s...

2009 GROB G350 1113-23044

• Manufacturer: Grob
• Model: G350
• Power requirement: 47 kW

incl. additional tool magazine ZM 182 1 spindle, 5 axes

KELLENBERGER - 1000 U - Cylindrical Grinding Machine

• Model: 1000U

KELLENBERGER cylindrical grinding machine with DGS belt filter system, further technical data can be found in the pictures, without guarantee Kellenberger 1000 U – Technical Data Machine Type: Kellenberger 1000 U...

2002 HELLER MCP-H 250 HS 1113-245032

• Manufacturer: Heller
• Power requirement: 62 kW

Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

1999 HELLER MCS-H300 HS 1113-245030

• Manufacturer: Heller

Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

2008 GROB G500 1113-6748

• Manufacturer: Grob
• Model: G500
• Power requirement: 24 kW

5 axes, 1 spindle A Axis -30TO + 210 DEG B Axis 360 x 0.001 Axis speed: X= 65 mm/min; Y= 55 mm/min; Z= 60 mm/min spindle: 29 KW max. spindle speed= 1200 rpm max. torque = 34.6 Nm tools: HSK-A63 87 places in magazine

VEB SCHLEIFMASCHINENWER KARL-MARX-STADT - Zskw 400x1600 - 1983 - Surface Grinding Machine

Dismantling must be done by buyer

2008 GROB G500 1113-6761

• Manufacturer: Grob
• Model: G500

4 axes, 1 spindle A-axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55 mm/min; Z= 60 mm/min Spindle tork = 262 Nm spindle 20KW / 10.000 RpM Tool HSK-A100 57 places in magazine

2009 GROB BZ 500 1113-245001

• Manufacturer: Grob
• Model: BZ 500

1-spindle Mechanical machining of cylinder head VR6

2002 GROB BZ 600 1113-245035

• Manufacturer: Grob
• Model: BZ 600

Horizontal machining center GROB BZ 600 with CNC control SIEMENS 840 C in good condition. 1 spindle

2002 HELLER MCP-H 250 HS 1113-245031

• Manufacturer: Heller
• Power requirement: 62 kW

Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

1999 HELLER MCP-H 250 HS 1113-245033

• Manufacturer: Heller
• Power requirement: 62 kW

Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

2002 HELLER MCH-300 1113-245025

• Manufacturer: Heller

Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

2002 HÜLLER-HILLE NBH 170 SPEED 1113-2100022

• Manufacturer: Hüller Hille
• Model: NBH 170 SPEED

This is a machine with 8 pallets. Control type: CNC | Control name: SINUMERIK 840 D | Freight basis: FCA | X-off: 1000 mm | Y-off: 800 mm | Z-way: 800 mm | Total power requirement: kW | Machine weight approx.: 24...

HAAS - VF2-EU - Vertical CNC Machining Center

• Manufacturer: Haas
• Model: VF-2
• Spindle taper: BT 40

All technical data was researched, read or measured on site. No guarantee of completeness and correctness - Tool changer with 20 places, partly equipped - HAAS own control system - Groove spacing approx. 125mm - ...