Used Materials Testing in Germany

+GF+ - GEORG FISCHER PNF / PZS

• Manufacturer: Georg Fischer

electric heating plate, power consumption 445 W, timer, test specimen tube, test specimen ring, ram base, control unit with thermal printer and strength manometer

PIE Gage

• Manufacturer: Unknown

Pie Gage (test body for MT according to ASME / ASTM); "Pie piece" ==> ASTM test body D 250; Delivery in a wooden box

+GF+ - GEORG FISCHER SPE

• Manufacturer: Georg Fischer
• Model: SPRA

Test specimen cylinder bushing, ram base, ejector, reading scale

+GF+ - GEORG FISCHER SPE

• Manufacturer: Georg Fischer
• Model: SPRA

Test specimen cylinder bushing, ram base, ejector, reading scale

+GF+ - GEORG FISCHER PCR

• Manufacturer: Georg Fischer

Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials

+GF+ - GEORG FISCHER SPCR

• Manufacturer: Georg Fischer

Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials

+GF+ - GEORG FISCHER PRP

• Manufacturer: Georg Fischer

Standard test cylinder production by vibratory pressing, pressing pressure 1 kp/cm²

Inductive white light LED light element

• Manufacturer: Unknown

Inductive white light LED lighting element | Swiveling head The white light element allows you to simultaneously illuminate the test area with colored magnetic powders during the material test, thus freeing up on...

Pfinder 240 water-based black magnetic suspension

• Manufacturer: Unknown

Pfinder 240 black water-based magnet suspension for daylight testing; 400 ml aerosol can Due to the use of an alternative, non-flammable propellant, this 400 ml aerosol can contains more than 50% more test agent ...

Pfinder 150 (MT Fluores.)

• Manufacturer: Unknown

Pfinder 150 fluorescent for testing under UV radiation Oil carrier; Aerosol can 500 ml, 1 unit = 12 cans

BNIF plates

Product information "BNIF plates" Comparison plates for testing surface roughness in accordance with EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case

Angle probe 70 °, 4 MHz, 8 x 9 mm equiv. MET 70-4

• Manufacturer: Unknown

angle beam probe 70°, 4 MHz, 8 x 9 mm equiv. MWB 70-4 transducer size: 8 x 9 mm in box / carton packing data sheet and AVG diagram