Used Presses in Germany

2002 Schuler GMO 2-400-3200-66/203 pressing force 4000 kN

• Manufacturer: Schuler

1 press system (400 t), manufacturer Schuler, type GMO 2-400-3200-66/203, built in 2002, pressing force 4,000 kN, stroke = 66 - 203 mm, stroke rate 20 - 100/min, table size 1,200 x 3,200 mm, tool weight max. 6,00...

Binding press capacity: 1850 kg/h 20-00067L 20-00067L

Cat. no.: 20-00067L Condition: New Piece: 1 Binding press Technical data: Maximum hourly output: 1850 kg/h Belt width: 800 mm Electrical connection data: 400 V/ 16 A/ 1.1 kW Pneumatic connection data max.6 bar Wa...

1999 SACMA SP260

• Manufacturer: Sacma

Info: bushing cut-off | Diameter range: 10,5 mm | Number of dies: 5 | Number of stations (incl. cut off): 6 | Cutting length: 85 mm | Shaft length under head: 65 mm | Output – pieces/min: 275 | Press power: 65t

Hydraulic double column press Loir Safe EDIMC 3000-600-320

• Manufacturer: Loir Safe

SN: 16.062, press force 30.000 kN, stroke 1.500 mm, weight without tool 450 t, tool spacing max. 5.000 x 2.500 mm, weight max. 60.000 kg, rapid lowering speed max. 400 mm/s, follow-up time 192 mm/s, table size 5....

Bucher press GUYER HP5000 18-00239Dag 18-00239Dag

• Model: HP 5000

Cat. no.: 18-00239Dag Condition: Used Piece: 1 UNI- 145-000 Year of manufacture: 1977 Type: HP 5000 Capacity: 5to per load

Cover press EBS 610 Power: 1200 kg/h 20-00065L 20-00065L

Cat. no.: 20-00065L Condition: New Piece: 1 Uni-Mil Binding press EBS 610 Technical data: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400 V/ 16 A/ 0.37 kW Pneumatic connection ...

screw press

Pressing force [kN]: 100 Table size [mm]: 600 x 100 Installation height [mm]: 200

2003 Diaphragm tank press, Diemme 15,000 liters 21-0020EUBA 21-0020EUBA

• Manufacturer: Diemme

Cat. no.: 21-0020EUBA Condition: Used Piece: 1 UNI-GWF-Rep 035-000 Diaphragm tank press, Diemme Type: SPS 150 MAS Capacity: 15 to Year of construction: 2003 Press dimensions: approx. LxWxH: 7300x2400x3000 mm Scre...

Cover press EBK 610 Power: 1200 kg/h 20-00066L 20-00066L

Cat. no.: 20-00066L Condition: New Piece: 1 Binding press EBK 610 Technical data: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400 V/ 16 A/ 0.37 kW Pneumatic connection data max...

1995 NATIONAL FORMAX FX35CF

• Manufacturer: Formax

Info: bushing cut-off , PKO , Forma packs | Diameter range: 11,8 mm | Number of dies: 5 | Number of stations: 6 | Cutting length: 3 – 45 mm | Shaft length under head: 50 mm | Output – pieces/min: 85 – 255 | Pres...

1986 SAKAMURA BPF560S

• Manufacturer: Sakamura

Info: bushing cut-off , PKO , IFO , Slug feeding possible | Diameter range: 16-34 mm | Number of dies: 5 | Number of stations: 6 | Cutting length: 210 mm | Shaft length under head: 180 mm | Output – pieces/min: ...

1976 HATEBUR BKA5

• Manufacturer: HATEBUR

Info: bushing cut-off , PKO 95 mm | Diameter range: 16-36 mm | Number of dies: 4 | Number of stations: 5 | Cutting length: 30 – 260 mm | Shaft length under head: 30 – 220 mm | Output – pieces/min: 35-70 | Press ...

Binding press EB 1004 Capacity: 2500 kg/h 20-00068L 20-00068L

Cat. no.: 20-00068L Condition: New Piece: 1 Binding press EB 1004 Capacity: 2500 kg/h Technical data: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400 V/ 16 A/ 1.1 kW Pneumatic...

Single-belt press EB 1004 EL Capacity: 2500 kg/h 20-00070L 20-00070L

Cat. no.: 20-00070L Condition: New Piece: 1 Uni-Mil Binding press EB 1004 EL Capacity: 2500 kg/h Technical data: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400 V/ 16 A/ 1.1 k...

hydraulic press / 2 telescopical piston

• Manufacturer: hydraulic press / 2 telescopical piston

oil suction one side, lift way total ap. 5400 mm, cylinder outside Ø ap 160 mm, largest length ap. 3400 mm good