Used Presses in Germany

1990 KAISER V 40 W 600

• Manufacturer: Kaiser
• Model: V 40 W 600
• Shut height: 290 mm

2002 a roll feeder was installed Modell MWVL-200, YOM 2002

1020 liter heatable/coolable, insulated pressure vessel made of stainless steel 304

max. allowable working temperature: 50 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 50 °C remarks: Cooling system, consisting of a copper pipe that is attached ove...

11118 Liter Rostfrjia heiz-/kühlbarer Reaktor aus V2A

• Manufacturer: Rostfrjia

max. allowable working temperature: 150 °C Volume: 11.118 liter | Vacuum: 1,0 bar | Max. excess pressure: 4,0 bar

5000 liter horizontal tank, Aisi 316

max. allowable working temperature: 50 °C remarks: 1 manhole diameter 500 mm in the front floor; tank with internal fittings (see photos); tank not suitable for use in the food sector

1500 liter pressure vessel, AISI304

max. allowable working underpressure (dj): 4,0 bar remarks: No guarantee for the functionality of the heat-/cooling jacket (has not been tested)

11424 liter coolable pressure vessel / sterile tank, Aisi 304

• Manufacturer: ALFA-LAVAL

max. allowable working temperature: 145 °C Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, pipe end cut flush remarks: Do...

14000 liter tank, Aisi 304

• Manufacturer: Rieger

max. allowable working temperature: 50 °C remarks: Outlet without former fitting; slight metallic discoloration inside the tank (see photos)

3860 liter reactor with blade stirrer, AISI316

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 16.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 200 °C Temperature control...

118000 liter insulated storage vessel with blade stirrer, AISI316 (located in Wörgl, Austria)

• Manufacturer: Hinke

Volume: 118.000 liter | Vacuum: 0,25 bar | Max. excess pressure: 0,99 bar | Bottom: torispherical bottom | Stand type: skirt support | Insulation: available | Insulating jacket: riveted | Diameter inside: 4.410 ...

3586 liter heat-/coolable reactor with anchor stirrer, AISI316

• Manufacturer: HANAG

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 16.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 200 °C Temperature control...

3690 liter heat-/coolable reactor vessel with anchor stirrer, AISI316

• Manufacturer: HANAG

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 16.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 200 °C Temperature control...

1285 liter heat-/coolable tank, Aisi 304

max. allowable working temperature: 50 °C Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: According to information from the previous operator, the tanks we...

5700 liter insulated pressure vessel, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 200 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Manhole DN 600; 1 heating coil originally located inside the vessel no l...

1750 liter heat-/coolable tank, Aisi 316

• Manufacturer: Hakolb-Werke

max. allowable working temperature: 160 °C max. allowable working overpressure (dj): 15.4 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control botto...

1997 KAISER KSTU 1250-12.5-3PR

• Manufacturer: Kaiser
• Shut height: 450 mm

electrical overload protection pneumatic clutch 2 connecting rods PLC Siemens S5 Strip shear AI 40 max. shear force 10t Sheet thickness max. 4 mm Sheet width max. 400 mm Cross section 600 mm2 Kaiser Feeder KWV 40...