Used Processing in Bavaria, Germany

Gear motor

Engine speed: 1380 rpm | Gear unit speed: 48 rpm | Power: 0.55 kW | Current: 2,70 / 1,55 A | Voltage: 220 / 400 V | Base construction: Design: M3B | Features: 20 mm solid shaft; break: 10 Nm, 230 V

Gear motor

• Manufacturer: SEW-Eurodrive

Engine speed: 1460 rpm | Torque: 210 Nm | Power factor: 0 | Power: 1,1 kW | Current: 4,20 / 2,40 A | Voltage: 230 / 400 V | Frequency: 50 Hz | Base construction: Design: M4A | Features: Break: 6,5 Nm, 230 V

Gear motor

• Manufacturer: ABM Greiffenberger

Engine speed: 1400 rpm | Gear unit speed: 50 rpm | Power: 0,37 kW | Current: 1,2 A | Voltage: 380 V | Features: 38 mm solid shaft

Gear motor

• Manufacturer: Herforder Elektromotoren

Engine speed: 1680 rpm | Gear unit speed: 45 rpm | Power: 1,1 kW | Current: 3,0 A | Voltage: 380 V | Features: 40 mm hollow shaft

Gear motor

• Manufacturer: Bauer Geared Motor

Engine speed: 700 rpm | Gear unit speed: 27 rpm | Power: 0,55 kW | Current: 2,2 A | Voltage: 380 V | Features: 35 mm Vollwelle

Gear motor

• Manufacturer: SEW-Eurodrive

Engine speed: 2750 rpm | Gear unit speed: 72 rpm | Power: 0,88 - 1,3 kW | Current: 2,5 - 3,35 A | Voltage: 400 V | Base construction: Design: M1A | Features: 30 mm solid shaft

Gear motor

• Manufacturer: vbw-weihenstephan

Engine speed: 1400 rpm | Gear unit speed: 118 rpm | Power: 1,1 kW | Current: 2,8 A | Voltage: 400 V | Base construction: Design: H1A | Features: 35 mm hollow shaft

geared motor

• Manufacturer: Bauer Geared Motor GmbH

Additional title: electrical | Rotation number motor: 3000 rpm | Rotation number gearbox: 369 rpm i=8,12 | Torque motor: 8 Nm | Torque gearbox: 76 Nm | Power: S1 | Current: 7,2 A | Frequency: max. 250 Hz | Weigh...

TOMRA - AUTOSORT & INNOSORT FLAKE - Two-stage plastic sorting system

Two-stage plastic sorting system with TOMRA AUTOSORT and INNOSORT FLAKE Sorting system for the automated separation of plastics according to polymer type and color, equipped with NIR and RGB camera systems. Li...

MEDELA Foot Vacuum Regulator

• Manufacturer: Medela

077.0731 Foot switch for regulating the suction, with 077.0521 Clamp, NEW, ovp

Water deaeration plant

• Manufacturer: Ortmann+Herbst

Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn...

premix plant

• Manufacturer: Falterbaum

Additional title: two component mixing plant with deareation and carbonisation | Capacity: 9600 l/h | Maximum co2 content (operating value): 8 to 8,5 g/l | Residual oxygen content (operating value): 1 to 1,5 mg/l

Velcorin dosing system

• Manufacturer: DMT

Velcorin dosing system for cold sterilization. Manufactured by DMT Service, reliable dosing to ensure microbiological safety in beverages. Ideal for integration into existing filling lines. Our team at VBW Asset...

carbonisation plant

• Manufacturer: APV

The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the sat...

Dealcoholisation plant

• Manufacturer: APV

The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water o...