Used Saws in Germany

Trusted Seller
1987 KALTENBACH KKS 400 E
- Manufacturer: Kaltenbach
- Model: KKS-400
Saw blade diameter: 400 mm Cutting area round: 130 mm rectangle: 305 x 40 mm mitered at 45° round: 130 mm rectangle: 245 x 40 mm 2 cutting speeds by switchable-pole motor: 9 and 18 m/min Feed speed hydrauli...
Wiesbaden, Germany
Trusted Seller
MEP Shark 332-1 SXI EVO
- Manufacturer: MEP
- Model: Shark 332
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semi-automatic dynamic system: Manual lowering of the saw blade to the desire...
Günzburg, Germany
Trusted Seller
MEP Shark 282 SXI EVO
- Manufacturer: MEP
- Model: Shark 282
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semi-automatic dynamic system: Manual lowering of the saw blade to the desire...
Günzburg, Germany
Trusted Seller
2015 HÄBERLE AL 350/A
- Manufacturer: HÄBERLE
Saw blade diameter: 350 mm for pipes 90/45°: 120/110 mm for square tube 90/45°: 105/95 mm for profiles 45°: 105105/80 or 110 x 80 mm for round material at 90/45°: 60/50 mm 2 saw blade speeds: 1400/2800 rpm ...
Wiesbaden, Germany
Trusted Seller
2018 BERG & SCHMID VKS 370 manuell
- Manufacturer: Berg & Schmid
- Model: VKS 370 MANUELL
Saw blade diameter: 370 mm Cutting area at 90° round: 120 mm square: 100 mm rectangle: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 Saw blade speeds: 15/70 Upm D...
Wiesbaden, Germany
Trusted Seller
2007 BEHRINGER-EISELE VMS 370
- Manufacturer: Behringer
- Model: VMS 370
Saw blade diameter: 370 mm Cutting area flat at 90/45/30°: 200 x 100/140 x 100/100 x 100 mm Cutting area square at 90/45/30°: 120/100/90 mm Cutting range round at 90 and 45/at 30°: 130/105 mm 2 saw blade spee...
Wiesbaden, Germany
Trusted Seller
MEP TIGER 372 SX EVO
- Manufacturer: MEP
- Model: Tiger 372
- Power requirement: 5.5 kW
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Saw blade diameter: 370x32x3mm | Vice: 190mm | Capacity 90 degrees round: 120mm | Capacity 90 degrees square: 110mm | Capacity 9...
Günzburg, Germany
Trusted Seller
1986 FORTE BA 251
- Manufacturer: Forte
- Model: BA 251
Add-ons Well-maintained automatic band saw Accessories Complete electrical system, hydraulic system, coolant system, quantity pre-selection, additional saw blade guide, chip brush
Wiesbaden, Germany
Trusted Seller
MEP TIGER 352 NC 5.0
- Manufacturer: MEP
- Model: Tiger 352
- Power requirement: 3 kW
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Saw blade diameter: 350x32x2,5mm | Vice: 190mm | Capacity 90 degrees round: 115mm | Capacity 90 degrees square: 95mm | Capacity ...
Günzburg, Germany
Trusted Seller
MEP Shark 282 CCS
- Manufacturer: MEP
- Model: Shark 282
- with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried o...
Günzburg, Germany
Trusted Seller
1984 MÖSSNER REKORD SSF 1050
- Manufacturer: Mössner - Rekord
- Model: SSF 1050
Additional Information Lightly used and very well-maintained high-performance vertical band saw, available in two different throat sizes. Accessories Various accessories, operating instructions
Wiesbaden, Germany
Trusted Seller
MEP SHARK 332-1 NC 5.0
- Manufacturer: MEP
- Model: Shark 332
- Power requirement: 2.2 kW
Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with...
Günzburg, Germany
Trusted Seller
2003 MEP CONDOR 90 CNC LR
- Manufacturer: MEP
- Model: Condor 90
Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm
Günzburg, Germany
Trusted Seller
MEP SHARK 331-1 NC SPIDER 5.0
- Manufacturer: MEP
- Model: Shark 331
- Power requirement: 2.2 kW
Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display f...
Günzburg, Germany
Trusted Seller
2000 KALTENBACH KBS 851 DGNC
- Manufacturer: Kaltenbach
- Model: KBS
This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It suppor...
Germany
Eisele VMS-III Saw
- Manufacturer: Eisele
- Model: VMS-III
Good condition Eisele VMS-III Saws available between 1971 and 1989 years. Located in Germany and other countries. Click request price for more information.
Germany