Used Extruders in England, United Kingdom

Twin Screw Baker Perkins Mixer/Extruder

• Manufacturer: Baker Perkins

Stainless Steel Jacketed. Main Rotor Mixer 170mm Dia X 1800mm Long . Chamber Dims 340mm Wide X 180mm Tall X 1800mm Long. 5.5Kw 74 Rpm Gear Drive To Twin Screw Cross Feed Extruder Head Mounted At 90 Degrees With 7...

William Boulton Screw Extruder Junior Da

• Manufacturer: William Boulton

Mild Steel Single Screw 125mm Dia.Mixer Feed 125mm.X 175mm. 125mm.X 175mm. Extruder Feed 75mm.Extruder Head With 1.5 Kw Variable Speed Gear Drive

Iddon Single Screw Tool Steel Extruder

• Manufacturer: Iddon

Type Wx 63mm Dia 22:1 Ratio Long Screw With 3-Stage Electric Heating Jacket To Discharge Plate.Driven By 3/18.5 Kw 97/25 Rpm Slip Ring Drive.Overall Size 3600 X 1100 X 1400 M/M Tall Complete With Control Panel.

Gladstone SS Super Pugmill Extruder G75

Stainless Steel Jacketed Superpug Mill Designed to Masticate and Extrude Product Chamber 2 Off 75 mm Dia Augers X 750 mm Long Chamber Feed 250 mm X 150 mm with 60 mm Dia Discharge Point to fit Extruder Profile. A...

Nuova Euromec Twin Screw Extruder 70/Fs

• Manufacturer: Euromec

Stainless Steel body with Nylon Twin Screws 160mm dia X 1,000mm Long. Fed by 2 Off 110mm dia X 400mm Face Cutter Rotors to Feed Main Extruder. Driven by 35 kW drive. Water Cooled Jacket with 150mm X 100mm Cutter....

Samfull S/S extruder with horizontal form fill and sealer

Stainless Steel extruder 120 mm dia x 660 mm long with 2 off horizontal feed rolls about 65 mm dia x 660 mm long with extruder die head to feed horizontal form fill and sealer set up to fill 90 to 110 mm wide x 1...

Colinex Single Screw Elec Extruder TPTC14/5

Single Screw Extruder with 32mm dia x 1000mm long auger 24 to 1 ratio with 5 off heated zones with hydraulic drive motor twin roll puller. Overall size 1900mm x 700mm x 1800mm tall 1000mm x 700mm x 1800mm tall wi...

120mm Battenfeld Single Screw Extruder

• Manufacturer: Battenfeld

Reifenhauser Bitruder BT80 M/S Twin Screw Extruder

• Manufacturer: Reifenhäuser

Mild Steel Twin Screw Counter Rotating Extruder 80mm Dia x 570mm long with 3 off Jacket zones with 60L feed hopper 570mm x 690mm x 550mm deep, with 0.5 to 38.1 kW variable speed approx 10 to 22 rpm. Overall size ...

120mm-OMV-single-screw-extruder

120mm OMV single screw extruder vented 36D with screen changer and Maag model 90 gear pump with 20kw dc motor. 120mm OMV extruder, 36d vented, 156 kW DC Drive, electrically heated water cooled barrel. Gearbox oil...