Used Winders & Unwinders in Piedmont, Italy

Assembly winder FADIS

Mod.FA/B.E - n.24 heads - pitch 8 inch (200 mm) - tube ø 43 mm - 3 ply - optical sensor BTSR - internal low creel - meter counter - cutter device - y.o.c. 1997

1980 Assembly winder BODEGA

- n.30 heads - double side - pitch 10 "(250 mm) - cylindrical tube diam.72 mm - n.5 ply - mechanical casse-fils - internal feeding creel + external creel - single setting meter counter for each side - year of con...

2009 Automatic cone winder GILBOS

Mod.Bitwinder -single head -suitable to rewind rest yarn -15-position carousel -pitch 10" (250 mm) -conicity cylindrical -splicer -supply voltage 480/3 -year 2008/2009

2005 Electronic cone winder Fadis

Mod.SINCRO/RSD - with n.36 heads - electronic yarn guide - motorized tailstock - precision crossing - pitch 8"(200 mm) with the possibility to change it in 6"(152 mm) - conical tube length 230 mm - diam.internal ...

2003 Electronic cone winder SSM

Mod.Preciflex - with n.48 heads - precicontrol head board - electronic yarn guide - mandrel - precision crossing - pitch 8 "(200 mm) - conical tube length 230 mm - diam.internal base 56 mm- diam.tip 30 mm - posit...

2004 Electronic Hank-to-cone winder Fadis

mod.TUAN/D-E - Maiun unit LX (left) - n.20 heads (n.5 heads per module) - pitch 6" (152 mm) - conicity 5°57’ - "C" arm tailstocks - swift width 350 mm - double drag waxer - double positive feeder - n.1 inverter p...

2000 Electronic Hank-to-cone winder CORGHI

mod.E/4 -n.4 heads -pitch 6" (152 mm) -conicity 5°57' on mandrel -reel width 240 mm -counter-rotating driven waxing device -overfeeder -double yarn brake -mechanical clearer -potentiometer for speed adjustment -y...

2003 Assembly winder CORGHI mod.BE/234

- n.27 heads each - pitch 8” (200 mm) - tube ø 54 mm - 3 ply - creel from below with 3 cone holders per head - single-setting meter counter per head - cutter - potentiometer for adjusting the working speed (n.1 e...

2003 Electronic Hank-to-cone winder CORGHI

mod.ICL/6 - n.6 heads each - pitch 6" (152 mm) - conicity 4°20' or 5°57' - reel width 340 mm - counter-rotating driven waxing device - double positive feeder - double yarn brake - mechanical clearer - year of con...

2007 Electronic Hank-to-cone winder Fadis

mod.Sincro/D-SW 500 - n.20 heads - main unit SX - electronic synchro yarn guide - pitch 6" (152 mm) – conicity 5°57’ - motorized swift - swift width 350 mm - load cell that interacts with the swift speed - "C" ar...

1998 Electronic Hank-to-cone winder CORGHI

mod.ICL/24 - n.24 heads - pitch 6" (152 mm) - conicity 5°57' - reel width 340 mm - counter-rotating driven waxing device - double positive feeder - double yarn brake - mechanical clearer - single setting meter co...

2004 Automatic cone winder SCHLAFHORST 338

• Manufacturer: Schlafhorst

- n.30 heads each - automatic spools loader - h spools in feed 350 mm - 2 turns drum variable step - n.2 spool preparators (n.1 linear – n.1 oscillating) - electronic clearers Uster Quantum2 – O30+F23 - pitch 6" ...

2000 Electronic cone winder CORGHI Mod.RE

-n.4 heads -yarn guide -one motor per head -pitch 6"(152 mm) -conicity 5°57' on mandrel -driven waxing device counter rotating -double yarn stretcher -mechanical clearers -stop at required diameter -internal low ...

1996 Automatic cone winder SAVIO ESPERO RL

• Manufacturer: Savio

-main unit SX -n.60 heads -feeding by cone with automatic cone change -drum with 2 turns constant pitch -axial motion -conicity 4°20’ -waxing device -aquasplicer Mesdan mod.4923E -electronic clearers Peyer 551 -n...

1995 Electronic cone winder CORGHI Mod.BR

-n.36 Heads -single side -pitch 152 mm.(6") -grooved drum 2,5 turns variable step diam.82 mm -conicity 5°57' -"C" arm with tailstock -counter-rotating controlled Waxing device -one yarn-stretcher each head -mecha...