- Trusted Seller
2018 Pebco PCC-29-20
- Manufacturer: Pebco
Machine type: Process Equipment | Machine location: Upon Request | Stock #: 093274 | -material flow rate: 5,000 tons/hr | -diverter: 20″ Single Blade | -dimensions of diverter: 40 1/2″ x 16″ x 21 3/8″ | -weight ...
Tiger Depack HS-90 Depackager
- Manufacturer: Tiger Depack
The largest Tiger Depackager, the HS-90, is the secret ingredient that helps you turn food waste into profit by separating organic waste from inorganic packaging. The Tiger HS-90 can feed, separate, process, and ...
Avon, OH- Trusted Seller
2022 Roth MFM2S
- Manufacturer: Roth
Equipped With: Beckhoff Industrial PC Control System Quick Change Blade Design Automatic Pleating Height Adjustment Linear Top and Bottom Blade Automatic Platform Setting Change On the Go Top Gap – Bottom Gap Inp...
- Trusted Seller
2021 SnowBall Machinery SNCF-600
- Manufacturer: SnowBall Machinery
Machine type: Process Equipment | Machine location: Upon Request | Stock #: 639717 | -capacity: 600L | -pneumatic requirements: 6 bar, 6L/min | -electrical requirements: 220V, 3P, 60Hz | -dimensions: 55.12″ x 35...
- Trusted Seller
2020 Convectium 710 Shark 010-0707100-0007-0A
- Manufacturer: Convectium
Fill up to 100 devices at a time in less than 60 seconds Dual heat injection system (Max temp of 125C) 120 PSI Maximum Pressure / Ultra-Quiet – Only 60 decibels
- Trusted Seller
2013 Frick XLP2-1012-503
- Manufacturer: Frick
335 Evaporative Tons Rated for R-717 and R-134a Refrigerants Base Heat Rejection = 6953 MBTUH 30 HP Fan Motor (2) 5HP Pump Motor Also Included: Mycom 200VLG Rotary Screw R-717 Refrigerant Compressor 400HP 480V 3P...
- Trusted Seller
Sprayez 3000
- Manufacturer: Sprayez
Machine type: Process Equipment | Machine location: Virginia | Stock #: 765229 | -max working pressure: 2000 PSI | -max hose length: 250′ | -max fluid temp: 194°F | -max output: 30lbs/min | -electrical requireme...
- Trusted Seller
Wabash PC50-2418-4TM
- Manufacturer: Wabash
Machine type: Process Equipment | Machine location: California | Stock #: 631604 | -compression tonnage: 50 Tons | -compression cyl.: 7×7 | -platens: 24″ x 18″ Electric Heated, 9600 watts | -motor hp: 3 HP | -el...
- Trusted Seller
2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 669797 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller
2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 442249 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller
Mikro-ACM-Pulverizer, Model 60ACM, 60 HP
- Manufacturer: Mikro
Mikro-ACM-Pulverizer, Model 60ACM, 60 HP Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 60 hp, 220/440 volt motor,1700 rpm motor, separato...
Cleveland, OH - Trusted Seller
Mikro-ACM-Pulverizer, Model 60ACM, 75 HP
- Manufacturer: Mikro
Mikro-ACM-Pulverizer, Model 60ACM, 75 HP Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 75 hp, 230/460 volt motor,1800 rpm motor, separato...
Cleveland, OH - Trusted Seller
20" x 37" Rotex Screen, 2 Deck, Model 12
- Manufacturer: Rotex
20" x 37" Rotex Screen, 2 Deck, Model 12 Used 20" x 40" Rotex screen, model 12, stainless steel decks and bottom pan, aluminum cover, two-deck design on stand with 1 hp, 208-230/460 volt motor.
Cleveland, OH - Trusted Seller
Quadro Comil, Model 196S, S/S
- Manufacturer: Quadro
Quadro Comil, Model 196S, S/S Used Quadro Comil, model196S, stainless steel construction, 7.5 hp, xp motor, serial# 196-0841.
Cleveland, OH - Trusted Seller
Bauermeister Pin mill, S/S
- Manufacturer: Bauermeister
Bauermeister Pin mill, S/S Used Bauermeister pin mill, model UTL-316-SS, stainless steel product contact surfaces, pin mill wheel driven by 3 hp, 230/460 volt, 3450 rpm motor, feed by Accurate volumetric feeder, ...
Cleveland, OH 
Arburg 270 C 400-100 Injection Molding
- Manufacturer: Arburg
- Model: 270 C 400-100
Good condition Arburg 270 C 400-100 Injection Moldings manufactured in 2003. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
