Used agitators in Germany

Agitator tank 13 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with curved bottoms, inclined blade agitator from the top center, 4 kW, approx. 40 rpm, with bottom bearing, internal pipe coil on the cylinder and lower bottom, operating...

Agitator tank 18 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, height-adjustable, open at the top, with 200 mm reinforcement rim, with lower conical base, with cross member for inclined blade agitator, eccentric from above, approx. 2....

Agitator tank 7 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with curved bases. Grid agitator from the top center, 7.5 kW, approx. 40 rpm. Double jacket around cylinder and lower base for pressureless heating/cooling. Insulation aro...

Pneumatic agitator from – with stirring rod 27105

Compulsory mixer, agitator, mixing tool, compressed air manual agitator, compressed air agitator

WOLF Agitator Tank

• Manufacturer: Wolf

Agitator containers of type RB basically consist of a double-walled container, which is generally heated with hot water, and an agitator that keeps the mass moving steadily. The movement facilitates the exchange ...

Agitator tank 0.8 cbm

• Manufacturer: Sielmann

Design: cylindrical, suspended on support ring with upper flat base, flanged and lower curved base. Disc agitator from above and side, 1.2/2.2 kW, 710/1,440 rpm. Connections: 1 opening 350 x 400 mm with hinged li...

Agitator tank 50 cbm, insulated

• Manufacturer: Sielmann

Design: Upright cylinder with a flat bottom, sloped toward the outlet, with a conical top bottom. Trapezoidal agitator centered at the top, approx. 5 kW, approx. 30 rpm. With an external half-pipe coil, 18 m² on ...

Agitator tank 1.8 cbm

• Manufacturer: Sielmann

Design: Cylindrical suspended on 4 iron claws with a flat upper end, flanged, and a lower end with a dished end. Anchor agitator mounted from the top center, 1.1 kW, 25 rpm, with baffle. Double jacket around the ...

Agitator tank 2.56 cbm

• Manufacturer: Sielmann

Design: cylindrical, suspended on 4 Fe claws, with a flat upper end, flanged, and a dished lower end. Small anchor agitator mounted from the top center, 1.7/2.6 kW, 16/31.5 rpm, with baffle. Double jacket around ...

Agitator tank 11 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with upper conical base and lower flat base, with gradient to the outlet. Propeller agitator in the upper base, eccentric, 1.0 kW, 470 rpm, with interna...

Agitator tank 1.1 cbm, hanging

• Manufacturer: Sielmann

Design: cylindrical, suspended on 4 supports with curved bottoms. Propeller agitator driven from above, eccentric, 1.1 kW, 156 rpm. Connections: 1 hinged lid dome Ø 400 mm in the upper bottom, 1 nipple 1" outlet ...

Agitator tank 1.2 cbm

• Manufacturer: Sielmann

Operating data: according to nameplate -0.005/0.04 bar operating pressure -10/50 °C operating temperature Design: manufactured according to technical regulations PED; ASME VIII Div.1, Ed.2004, Ad.2006, classifica...