Used agitators in Hamburg, Germany

5870 liter isolated agitator tank, Aisi 304 with blade agitator

Volume: 5.870 liter | Stand type: legs height adjustable | Quantity legs: 6 Piece | Insulation: available | Insulating jacket: welded | Insulation material: PU - foam | Total height: 2.000 mm | Total width: 2.02...

2900 liter insulated agitator tank, Aisi 304 with anchor agitator

Volume: 2.900 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating jacket: hermetically welded | Insulation material: stone wool | Diameter inside: 1.800 mm | ...

1300 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket around half of the cylinder height; 4 support brackets, Aisi 304 (parts of the brackets were ...

420 Liter agitator tank, Aisi 304 with propeller agitator

remarks: 2 sight glasses in the cylinder no longer present; feet made of Fe, painted (with reinforcements made of st. st.); A pipe with a diameter of approx. 25 mm runs off the outlet pipe (see photos) agitator f...

3250 liter agitator tank, Aisi 316 with blades agitator

notice: some residues of previous content, pipe end cut flush remarks: Sheet metal cutouts in the lid; outlet probably diameter 80 mm

700 liter agitator tank, Aisi 316 with propeller agitator

remarks: Agitator, Aisi 304 (1.4541); Feet with pedestal and screws made of Fe

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

500 liter agitator tank, Aisi 304 with disc agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

technical equipment: level indicator (without guarantee), butterfly valve EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

2210 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Rieger

max. allowable working temperature: 90 °C remarks: 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel ...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

200 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: URBAN

agitator features: Drehzahlregelung über Frequenzumrichter (siehe Fotos)

12000 liter insulated agitator tank, Aisi 304 with 2 propeller agitators

• Manufacturer: Waldner

remarks: 1 partition (with openings) in the middle of the tank divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner tank straight instead of round due to the design; both tank chamber...

5000 liter agitator tank with blade agitator, Aisi 304

agitator features: Agitator arranged eccentrically on a welded crossbar

4500 liter coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket with trickle ring - only suitable for pressureless cooling; a rectangular sheet was cut out o...

270 liter heat-/coolable agitator tank, Aisi 304 with anchor agitator

Temperature control cylinder (dj): double jacket remarks: Double jacket for heating and cooling made of Fe; Full pipe coil for heating/cooling made of Aisi 304; Stand frame made of Fe