Used agitators in osutoraria

PFAUDLER GLASS COATED AGITATOR SHAFT - 44"Ø SPAN

• Manufacturer: Pfaudler

3.5"Ø SOLID CARBON STEEL SHAFT ENTIRELY GLASS COATED FROM DRIVE END. THE STEPPED-DOWN DRIVE CONNECTION IS 3.0"Ø X 2.25" LONG WITH A 0.75" KEYWAY. LIKELY DESIGNED FOR A 48"Ø TANK OR LARGER. OVERALL LENGTH: 91"

Industrial Air 475 Gallon Stainless Steel Tank w/ Agitator

• Manufacturer: Industrial Air Inc.

All stainless steel formed and welded flat-bottom mix tank (11GA stainless sheet) Ø48" X 66" straight side Flat top with bridged support for a 1HP ProQuip agitator with 4-blade swept impeller 2"Ø bottom-side drai...

Graco R00-232 60-Gallon S/S Tank w/Graco Agitator LSA-117

• Manufacturer: Graco

Unit is USED with visible minor surface wear and some minor scratches none affecting the functionality or the intended use of the unit. Some units have residual material left over from previous use that will need...

Siemens B3-sv-7c Flender Gear Drive For Hwl2120n Agitator 55kw 19.948:1

• Manufacturer: Siemens

“New without Factory Packaging” Model number: B3-SV-07-C | Output diameter: 120 MM | Power: 55 KW | Ratio: 19.948:1 | Model line: FLENDER | Mpn: B3-SV-07-C | Shipping weight: 2043 lbs | Shipping dimensions: 53 x ...

Siemens B3-sv-7c Flender Gear Drive For Hwl2120n Agitator 55kw 19.948:1

• Manufacturer: Siemens

“New without Factory Packaging” Model number: B3-SV-07C | Output diameter: 120 MM | Power: 55 KW | Ratio: 19.948:1 | Model line: FLENDER | Mpn: B3-SV-07C | Shipping weight: 2178 lbs | Shipping dimensions: 65 x 45...

5 Gal Lee Metal Products Jacketed Double Motion Kettle Sweep Agitator

• Manufacturer: Lee Metal Products Co.

Serial No: 578-S Kettle Dimensions: 16" diameter X 10.5" deep with ½ jacket Double motion with agitator bars, counter-rotating surface scrapers and full cover. 1.5"Ø sanitary bottom drain and 3/4"NPTM jacket conn...

15 Cu. Ft. Stainless Steel Hopper with 3/4HP Agitator

Dry storage conical hopper (12GA. rolled & formed stainless sheet) One-piece cover with bracing and hinged lid 36" diameter with 10" straight side and 11" flanged outlet Slope of the cone is approximately 60° 2"Ø...

Acrison Stainless Steel Auger/Agitator Bin Discharger Feeder BDF-25N

• Manufacturer: Acrison

Serial No: 05536-01 Designed for mass gravity flow of product from storage above feeder. 304 stainless steel contact parts. Curved bottom housing with double gasketed inlet flange (2.5' square inside opening). Me...

Rietz 75 cu. Ft. Stainless Steel Double Ribbon Dual Agitator Blender

• Manufacturer: Reitz

Reitz Jacketed Stainless Steel Double Ribbon Dual Agitator Blender Model No: RDS-28-K3406 Serial No: RDS-780049 Jacket and Screws Rated for 14.9 PSIG Metal Thickness: Trough - .1875, Jacket - .1875, Head - .375 (...

Acrison Stainless Steel Auger/Agitator Bin Discharger Feeder BDF-25N

• Manufacturer: Acrison

ITEM #: 21233 Used Acrison Stainless Steel Auger/Agitator Bin Discharger Feeder BDF-25N Serial No: 05536-01Designed for mass gravity flow of product from storage above feeder.304 stainless steel contact parts.Cur...

5 Gal Lee Metal Products Jacketed Double Motion Kettle Sweep Agitator

• Manufacturer: Lee Metal Products Co.

ITEM #: 20856 Used 5 Gal Lee Metal Products Jacketed Double Motion Kettle Sweep Agitator Serial No: 578-SKettle Dimensions: 16" diameter X 10.5" deep with ½ jacketDouble motion with agitator bars, counter-rotatin...

Rietz 75 cu. Ft. Stainless Steel Double Ribbon Dual Agitator Blender

• Manufacturer: Reitz

ITEM #: 16372 Used Rietz 75 cu. Ft. Stainless Steel Double Ribbon Dual Agitator Blender Reitz Jacketed Stainless Steel Double Ribbon Dual Agitator Blender Model No: RDS-28-K3406Serial No: RDS-780049Jacket and Scr...

Bendel 2,000 Liter (550 Gallon) Stainless Steel Liquid Mix Tank w/ Agitator

• Manufacturer: Bendel, LLC

ITEM #: 18616 Used Bendel 2,000 Liter (550 Gallon) Stainless Steel Liquid Mix Tank w/ Agitator 304 stainless steel, formed and welded flat-bottom holding tank (11GA stainless sheet)Ø54" X 60" straight sideFlat to...

110 Gallon G&F S.S Tank w/Perma-San Agitator Mounted on a Fairbanks 10000lb Scale

• Manufacturer: G & F MANUFACTURING

Unit is USED with some visible minor surface wear, some minor scratches/cosmetic paint flaking/some surface rust on scale bottom none affecting the functionality or the intended use of the unit. Unit was used in ...