Used automated in Czech Republic

UNIMARK UM 75.2

Year: 2009 Condition: good Configuration: * manual gilding machine UNIMARK UM 75.2 Specifications: * maximum pressure - 1000 kg * fixed table size - 200x 250 mm * heated head size - 120x155 mm - 110x300 mm * 2...

2004 ApenGroup AermaxLine PKA 190N-

• Manufacturer: ApenGroup

Pressure: 230 Pa | Airflow: 1400 m³/h | Nominal heat input: 210 kW

2010 Epsilon E140Z

• Manufacturer: Epsilon
• Model: E140Z

Maximum lifting capacity: 1.4 t | The hydraulic arm was manufactured in 2014 and has been completely serviced this year. the hydraulic control valves were resealed all hydraulic hoses replaced all hydraulic cyli...

Epsilon M120Z

• Manufacturer: Epsilon

The hydraulic arm is after complete GO.

2021 Maolong ABC-15-00

• Manufacturer: Maolong

Pressure: 1500 kN | Table dimensions: 2300 x 1600 mm | Power input: 22 kW

2018 Haas Automation MINIMILL

• Manufacturer: Haas
• Model: MINIMILL
• Spindle taper: SK 40

Machine in excelent condition, under power can be tested anytime after agreement.

Haas Automation TM - 1 HE

• Manufacturer: Haas
• Model: TM-1

The machine is in good technical condition, under power, after agreement is possible to test it.

2015 Haas Automation DM-1

• Manufacturer: Haas
• Model: DM-1
• Spindle taper: CT 40

The machine is in good technical condition, under power, after agreement is possible to test it. Additional 4 and 5 axis. The machine is with half of the accessories shown in the photo.

2015 Haas Automation VM 6

• Manufacturer: Haas
• Model: VM-6
• Spindle taper: BT 40

The machine is in good technical condition possibile to test on power. The machine has a 4th and 5th axis.

2015 Haas Automation VF 2

• Manufacturer: Haas
• Model: VF-2
• Spindle taper: BT 40

The machine is in very good condition, it is possible to test it.

2017 Haas Automation ST-25

• Manufacturer: Haas
• Model: ST-25
• Spindle bore: 76 millimeter

The machine is in good condition, it can be retested.

2007 Haas Automation SL-30 THE

• Manufacturer: Haas
• Model: SL-30
• Spindle bore: 76 millimeter

The machine is good condition, under power, possible to test it.

2010 Haas Automation ST-30

• Manufacturer: Haas
• Model: ST-30
• Spindle bore: 88.9 millimeter

The machine is in good technical condition, under power, after agreement is possible to test it.

2020 Haas Automation ST-30

• Manufacturer: Haas
• Model: ST-30
• Spindle bore: 88.9 millimeter

The machine is in good technical condition, under power, after agreement is possible to test it.