Used automatic in Greece

Trusted Seller
2016 MEP SpA Focus 16
- Manufacturer: MEP
- Model: Focus
The machine consists of two pay-offs, pulling winch, all accessories (for Φ8mm to Φ16mm), oriiginal manuals. The machine is Like New, very well maintained, used very little. It is Fully Operative. LIKE NEW. FULLY...
Oraiokastro, Greece
Trusted Seller
2006 Schnell SpA Prima 12R
- Manufacturer: Schnell
It is a 12R model which means it works with double wire in 6mm to 10mm and sinlge wire from 6mm to 12mm. The machine comes with 2 pay-offs, all accessories for Φ8 to Φ12 and original manuals. It has been Fully Re...
Oraiokastro, Greece
Trusted Seller
2005 Schnell SpA CGS300+Robomaster 40/12
- Manufacturer: Schnell
The Center consists of: Shearline CGS300 in turn consisting of Storage rack with four compartments (rebar feeding). It is equipped with standard stairways, footboards, walkways, operator’s platform and arched ...
Oraiokastro, Greece
Trusted Seller
2013 MEP SpA Superflex 40/3/14 + CS440SX/14
- Manufacturer: MEP
- Model: Superflex 40
The Center consists of: 1. Superflex40/3/14 cutting bench with 3x14m roller lanes 2. CS440SX bidirectional automatic bending robot also 14m long, 3. B1M1R/12, 12m roller conveyor leading the cut to size bars to a...
Oraiokastro, Greece
Trusted Seller
2005 Pedax GmbH Combiline G + Permatic
- Manufacturer: Pedax GmbH
The Center consists of: 1. Combiline in turn consisting of a. Mobile rebar storage area 18m, 5 slots, b. Shear unit, with control console, and 14m run-off kicking off: i. To the right on a roller covneyo...
Oraiokastro, Greece
Trusted Seller
2005 Stema Unicut 16XV
- Manufacturer: Stema
The machine runs up to Φ16mm, and consists of Main hudraulically powered Straightening & Cutting Unit, Industrial PC, two pay-offs and two coil holders and twelve meters run-off. Good Full set of Spare Parts and ...
Oraiokastro, Greece
Trusted Seller
2006 MEP SpA GAM1500
- Manufacturer: MEP
Fully Operational (still producing) with all parts necessary for the production of piles up to 1500mm and 12000mm Very Good, Still Operational Subject to agreement, the machine can be accompanied with an addition...
Oraiokastro, Greece
Trusted Seller
2012 MEP SpA GAM1500
- Manufacturer: MEP
The Machine was bought in 2012, used only in very few projects. The reading on the hour counter is real. It is in excellent condition. It is currently disassembled safely stored. It only needs to be cleaned and r...
Oraiokastro, Greece
Trusted Seller
2011 Schnell SpA Spirex Sapiens
- Manufacturer: Schnell
Automatic bidirectional spiral-stirrup machine processing hot rolled or cold drawn coils. Driven by electric servomotors. In the horizontal position, downward, it allows the production of the continuous stirrup u...
Oraiokastro, Greece
Trusted Seller
2018 Schnell SpA CM PRO 1600/14
- Manufacturer: Schnell
The machine is a Fully Fledged capable of producing round piles up to 1.600mm in diameter and up to 14m in length. It is also possible to produce square or rectangular cages and cages with the bars bent on the en...
Oraiokastro, Greece
Trusted Seller
2002 Pedax GmbH Combiline + Permatic
- Manufacturer: Pedax GmbH
The Center consists of: 1. Combiline in turn consisting of a. Mobile rebar storage area 12m, 5 slots, b. Hydraulic plant and electrical board, c. Shear unit, with control console, and 12m run-off kicking of...
Oraiokastro, Greece
Trusted Seller
1994 MEP/OMES RF20
- Manufacturer: Omes
The machine has been refurbsidhed, apart from its electronics (old type control panel). It is in EXCELLENT condition, FULLY OPERATIVE. It processes diameters Φ6mm to Φ16mm. It comes with a 12m run-off, one pay-of...
Oraiokastro, Greece
Trusted Seller
2008 MEP SpA GAM1500
- Manufacturer: MEP
The machine is a Fully Fledged 12m/1,500mm model, consisting of machine min body, rebar storage area along with walking corridor, welding unit and a variety of rings and bushes. It has been used very little and r...
Oraiokastro, Greece
Trusted Seller
2015 MEP SpA Bitronic 16-2
- Manufacturer: MEP
A Quasi New, Fully Fledged, Fully Operative Machine. It consists of two pay-offs, pulling winch, all accessories (fro Φ8mm to Φ16mm), and 12m collection bench. LIKE NEW. FULLY OPERATIVE Spare parts A LIKE NEW MAC...
Oraiokastro, Greece
Trusted Seller
2008 Arm-Tec Spinmaster CL12
- Manufacturer: Arm-Tec
The Machine is a 12m Classic Version, consisting of rebar storage area, pulling unit and 12m roll mat macine with three modules. The machine is in EXCELLENT condition – LIKE NEW. The Machine is Fully Operative EX...
Oraiokastro, Greece